LUBRIPLATE SFGO ULTRA 320 100% SYNTHETIC, POLYALPHAOLEFIN (PAO)-BASED, HIGH-PERFORMANCE, SUPER MULTI-PURPOSE, FLUID LUBRICANTS L0986-061 (16GL/¼ DRUM)

DESCRIPTIONLUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO synthetic base oils. These Polyalphaolefin(PAO) based synthetic fluids are outstanding lubricants for use under severe conditions subject to extreme high and low temperatures. They exhibit outstanding oxidation resistance, thermal stability, anti-wear protection, and have the extreme pressure capabilities required for industrial gearboxes. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to monitor performance, improve predictive maintenance and achieve the longest potential oil drain interval. SFGO Ultra Series has the potential to achieve 3 times or more the typical oil drain interval of mineral based oils. Contact your authorized LUBRIPLATE Distributor for more information on the LUBRIPLATE Oil Analysis Program. APPLICATIONSLUBRIPLATE SFGO Ultra Series is recommended for gearboxes, bearings, pumps, compressors, blowers, and chains requiring ISO Viscosity Grades 100 through 1000. LUBRIPLATE SFGO Ultra Lubricants are compatible with most mineral base oils including LUBRIPLATE products such as LUBRIPLATE FMOAW Series and LUBRIPLATE SPO Series. Always consult LUBRIPLATE before changing to an SFGO Ultra fluid from an existing lubricant that may not be compatible with Polyalphaolefin based fluids. ADVANTAGESExcellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extended equipmentlife. Extreme pressure capabilities required for industrial gear boxes. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points which ensureoptimum performance over a wide operating temperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals, plasticsand paints. TYPICAL TEST DATAPROPERTY TEST METHOD TYPICAL RESULTS* SFGO SFGO SFGO SFGO SFGO SFGO SFGO Ultra 100 Ultra 150 Ultra 220 Ultra 320 Ultra 460 Ultra 680 Ultra 1000 Viscosity SUS @ 100°F ASTM D-2161 55676210881557214332894900Viscosity SUS @ 210°F ASTM D-2161 7797128161211275372Viscosity cSt @ 40°C ASTM D-445 98146222318452623950Viscosity cSt @ 100°C ASTM D-445 14192634465777Viscosity Index ASTM D-2270 145141146152159157157Pour Point ASTM D-97 -43°F/-42°C -43°F/-42°C -42°F/-41°C -40°F/-40°C -40°F/-40°C -45°F/-43°C -35°F/-37°C Flash Point ASTM D-92 485°F/252°C 495°F/257°C 520°F/271°C 520°F/271°C 480°F/249°C 500°F/260°C 500°F/260°C Fire Point ASTM D-92 520°F/271°C 525°F/274°C 540°F/282°C 545°F/285°C 515°F/268°C 545°F/285°C 545°F/285°C API Gravity ASTM D-287 33.933.232.63231.134.533.7Color ASTM D-1500 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 4-Ball Wear Test ASTM D-2266 0.32 mm 0.32 mm 0.32 mm 0.31 mm 0.31 mm 0.31 mm 0.30 mm FZG Scuffing, A/8.3/90 Failure Stage ASTM D5182/ DIN 51354 >14 >14 >14 Demulsibility Characteristics ASTM D-2711 Procedure B; Run 1: Percent of Water in Oil 0.30%*** *** *** *** *** *** Free Water Volume 86.8 ml *** *** *** *** *** *** Emulsion Volume 0.0 ml *** *** *** *** *** *** Demulsibility Characteristics ASTM D-2711 Procedure B; Run 2: Percent of Water in Oil 0.40%*** *** *** *** *** *** Free Water Volume 86.0 ml *** *** *** *** *** *** Emulsion Volume 0.0 ml *** *** *** *** *** *** Demulsibility Characteristics ASTM D-2711 Procedure B; Average: Percent of Water in Oil 0.40%*** *** *** *** *** *** Free Water Volume 86.4 ml *** *** *** *** *** *** Emulsion Volume 0.0 ml *** *** *** *** *** ***