Tie Down Engineering 49546 2 in. Galvanized Square Trailer Axle - 2,000 lbs Capacity with 1.16 in. Spindles - 85 in. Hub Face

The F90G (Tie Down Engineering/Dexter Marine part number 49546) is galvanized to resist the elements for years to come. The finish provides protection from marine environments. Its 2,000 pound capacity makes it a perfect replacement for small boat trailers with one axle. The easy lube spindle design makes re-greasing a breeze. With a grease gun on the zerk fitting, grease can be pushed through the spindle chamber to the inner bearing all the way through the hub cavity while purging older grease.

• Hot dipped galvanized steel beam to combat corrosion
• Galvanized axles will last much longer than painted ones and are perfect for marine applications
• Features a stainless steel wear sleeve on either spindle
• Slight camber present in the welds of the spindles
• Includes 2 castellated nuts, 2 washers, and 2 cotter pins
• EZ Lube spindle design features a zerk fitting at the ends of both spindles for easy bearing lubrication
• Flange-less
• Pre-drilled 5/16" drain hole
• Should not be used with wheels exceeding 13"

• Size: 2 in.
• Capacity: 2,000 lbs
• Hub Face Measurement: 85"
• Overall Length: 89.5"
• Beam: 2" x 2" Square
• Spring Center Range: 70" - 75"
• Spindle: 1.1/16" straight
• Country of Origin: United States