TOOL1SHOoo 40LBS 12V Thrust Electric Trolling Motor Engine Outboard Rubber Boats 408W for Aquaculture Fishing Outdoor Adventure

【Product Description】

This TOOL1SHOoo trolling motor is made of pure copper, which has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance. Meanwhile, it can overcome huge water resistance to increase the speed of driving. Its angle, gear, and height can all be freely adjusted. It is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats.

【Key  Feature】

Non-deformable——The suspension bracket is made of high-strength aluminum alloy, which can ensure that the bracket is not deformed by repeated disassembly and installation.

Fin Streamline Design——When it collides with an object underwater, the design can protect the propeller that is running at high speed.

Easy to Drive——The main rod is made of aluminum. Its lightweight will not increase the entire weight of your boat and the difficulty of driving.

Adjustable Depth and Angle——Its depth and angle can be freely adjusted according to the actual situation and your special needs.

Adjustable Gears——The fixed tiller has 5 forward and 3 reverse speeds. You can smoothly switch the speed and change the direction during driving.

Real-time Monitoring of Power——The top of the thruster has a real-time display of the battery power, allowing you to check the power situation any time and prepare for charging in advance to avoid running out of power in the middle of the voyage.

Propeller Design——The propeller is designed with a multi-dimensional optimization iterative method to improve propulsion efficiency and reduce propeller losses.

【specification】

Model: L40

Speed Control: F5-R2

Motor Type: Brush Motor

Rated Voltage(V): 12

Rated Speed(R/min): 1700

Rated Current(A): 34

Rated Power(W): 408

Control Handle: Retractable

Maximum Speed(km/h): 6

Noise: 50db

Battery Model: 12V 100A Batteries

Net Weight: 7.8kg/17.2lbs

Gross Weight: 9.3kg /20.5lbs

Propeller Model: 3 Leaves, 7.6*22.9cm/3*9in

Rod Length: 76cm/30inch

Package Size: 102*41*16cm (40.16*16.14*6.30inch)

【Package Content】

1*Trolling Motor

1*Power Propeller

1* Circuit Breaker Protector

1*Battery Clamp

1 Set of Screws

1*English Manual

【Installation】

1. Tear off the sticker at the spring on the handle.

2. Take out the handle, and align the handle with the interface at the inner shell of the handle.

3. Press the handle spring with one hand and push the handle in with the other hand. After a crunching sound is heard, the handle is installed.

4. Take out the cylindrical card pin and insert it into the round hole of the drive rod (note that the length of both ends needs to be consistent).

5. Align the back of the propeller with the card slot and the card pin horizontally, and then tap into the propeller with force.

6. Put in the card flap, then screw the nut to complete the installation.

7. Take the fins out of the box and insert them into the fin slot.

8. Put the included screws into the screw holes of the fins and put the nuts into the other end. Hold them down.

9. Then tighten the screws with the Phillips screwdriver.

10. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.