Electric Pipe Threader Pipe Threading Machine 6 Dies 1/2-2" HD Pipe Cutter 2300W

Electric Pipe Threader Pipe Threading Machine 6 Dies 1/2-2" HD Pipe Cutter 2300W

Descriptions:

1. Six Dies:

-- The package comes with six dies with the machine, they can meet your different demands for different tasks.

2. Tube Holder:

-- You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently.

3. Fixed Rod:

-- The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance.

4. Suitcase:

-- The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts.

Application:

This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9 mm to 49.6 mm.

Specifications:

Item condition: New

Threading range: 20.9-49.6mm/0.5-2in

Material: All copper wire machine

Power type: Alternating current

Rated power: 2300 (W)

Voltage: 110 V, 50 Hz

Rated spindle speed: 25 (r/min)

Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch)

Weight: 15.4kg/33.95lbs

Product dimensions : 57x14 x31cm/22.44x5.51x12.2in

Outer pipe diameter: 22,27,34,42,48,60mm

Inner pipe diameter: 15,20,25,32,40,50mm

Note: The plug is EU plug.

How to Use:

1. You should select the corresponding die head. The blade is installed from the right on the host.

2. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1).

3. Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts.

4. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel.

5. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host.

6. After the machine stopped, pull up the reverse switch and exit the tube.

7. This product supports the use of standard tubes.

Package Included:

1 x Pipe Threader

1 x Pipe Clamp

1 x Fixed Rod

2 x Carbon Brush

1 x Oil Can

6 x Dies

1 x Storage Box

Notes:

1. Add the lubricating oil every time you use it.

2. Please allow 1-3 cm error due to manual measurement. Please make sure you do not mind before you bid.