

Flange Series L-Track Pre-Drilled 48" QTY 2 | FE753NA48-04-3
Key item features
- Flange Series L-Track Pre-Drilled 48" QTY 2 | FE753NA48-04-3
- OMNI Surface Profile L-Track, Pre-Drilled
- QTY (2) - 48" (122cm) length
- Standard 82 degree countersunk holes are pre-drilled every 4” (102mm)
- Accommodates 5/16” (8mm) bolts
Includes:
Qty 2 L-Track Surface Profile, Pre-Drilled 48" | FE752NA048-04-3
Product Sheet
Omni Brochure
Omni Floor Anchorage Brochure
Omni L Track Instructions
Drawing of ProductSKU: FE753NA48-04-3
Now you can ‘mix & match’ retractors and manual belts from Q’STRAINT & SURE-LOK whenever you see the OMNI APPROVED Badge.
Designed for agencies that require total flexibility in a mixed-brand environment, the OMNI line takes the guesswork out of securing your passengers.
All OMNI Floor Anchor Systems feature stainless steel or aluminum materials designed for demanding transportation environments.
It has always been recommended that tie-downs match with the brand of their floor anchorages. Now with the OMNI series, you can reduce your liability and know that your products are tested and certified for both Q’Straint and Sure-Lok systems.Using OMNI anchorages and track make it possible to use both Q’Straint and Sure-Lok tie-downs. Every RETRACTOR in a wheelchair position must be EITHER from Q’Straint or Sure-Lok — never mix brands on a four-point securement. OMNI anchorages are strictly tested and certified to be used with approved Q’Straint and Sure-Lok systems. Other non-approved systems should not be used with OMNI anchorages at any time.VERSATILE SECUREMENT TRACK
The most widely used floor anchorage in the industry, L-Track is a length of pre-drilled track that can be installed throughout the vehicle and used to secure retractors or tie-downs to the floor and walls. The versatility of L-Track gives operators the freedom to accommodate virtually any 4-Point Securement location.
-
Vehicle Applications: School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
-
Warranty: 1 year* limited warranty coverage.
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
FEATURES- PRE-DRILLED - All 3 profiles of L-Track feature standard 82º countersunk holes pre-drilled every 4” (102mm). Each hole accommodates 5/16” (8mm) bolts. Special drilling patterns available, contact us for information.
- STANDARD LENGTHS - All 3 profiles of L-Track are available in multiple lengths. Special lengths available, contact us for information.
- DURABLE, LOW MAINTENANCE - Constructed from aluminum alloy (606
- By unknown
Specs
- Vehicle modelFE753NA48-04-3
- Brandunknown
- Has written warrantyNo
Free 30-day returns
How do you want your item?
About this item
Product details
- QTY (2) - 48" (122cm) length
- Standard 82 degree countersunk holes are pre-drilled every 4” (102mm)
- Accommodates 5/16” (8mm) bolts
Includes:
Qty 2 L-Track Surface Profile, Pre-Drilled 48" | FE752NA048-04-3
Product SheetOmni Brochure
Omni Floor Anchorage Brochure
Omni L Track Instructions
Drawing of Product
SKU: FE753NA48-04-3
Now you can ‘mix & match’ retractors and manual belts from Q’STRAINT & SURE-LOK whenever you see the OMNI APPROVED Badge.
Designed for agencies that require total flexibility in a mixed-brand environment, the OMNI line takes the guesswork out of securing your passengers.
All OMNI Floor Anchor Systems feature stainless steel or aluminum materials designed for demanding transportation environments.
It has always been recommended that tie-downs match with the brand of their floor anchorages. Now with the OMNI series, you can reduce your liability and know that your products are tested and certified for both Q’Straint and Sure-Lok systems.
VERSATILE SECUREMENT TRACK
The most widely used floor anchorage in the industry, L-Track is a length of pre-drilled track that can be installed throughout the vehicle and used to secure retractors or tie-downs to the floor and walls. The versatility of L-Track gives operators the freedom to accommodate virtually any 4-Point Securement location.
-
Vehicle Applications: School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
-
Warranty: 1 year* limited warranty coverage.
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
FEATURES- PRE-DRILLED - All 3 profiles of L-Track feature standard 82º countersunk holes pre-drilled every 4” (102mm). Each hole accommodates 5/16” (8mm) bolts. Special drilling patterns available, contact us for information.
- STANDARD LENGTHS - All 3 profiles of L-Track are available in multiple lengths. Special lengths available, contact us for information.
- DURABLE, LOW MAINTENANCE - Constructed from aluminum alloy (606
- Flange Series L-Track Pre-Drilled 48" QTY 2 | FE753NA48-04-3
- OMNI Surface Profile L-Track, Pre-Drilled
- QTY (2) - 48" (122cm) length
- Standard 82 degree countersunk holes are pre-drilled every 4” (102mm)
- Accommodates 5/16” (8mm) bolts
Includes:
Qty 2 L-Track Surface Profile, Pre-Drilled 48" | FE752NA048-04-3
Product Sheet
Omni Brochure
Omni Floor Anchorage Brochure
Omni L Track Instructions
Drawing of ProductSKU: FE753NA48-04-3
Now you can ‘mix & match’ retractors and manual belts from Q’STRAINT & SURE-LOK whenever you see the OMNI APPROVED Badge.
Designed for agencies that require total flexibility in a mixed-brand environment, the OMNI line takes the guesswork out of securing your passengers.
All OMNI Floor Anchor Systems feature stainless steel or aluminum materials designed for demanding transportation environments.
It has always been recommended that tie-downs match with the brand of their floor anchorages. Now with the OMNI series, you can reduce your liability and know that your products are tested and certified for both Q’Straint and Sure-Lok systems.Using OMNI anchorages and track make it possible to use both Q’Straint and Sure-Lok tie-downs. Every RETRACTOR in a wheelchair position must be EITHER from Q’Straint or Sure-Lok — never mix brands on a four-point securement. OMNI anchorages are strictly tested and certified to be used with approved Q’Straint and Sure-Lok systems. Other non-approved systems should not be used with OMNI anchorages at any time.VERSATILE SECUREMENT TRACK
The most widely used floor anchorage in the industry, L-Track is a length of pre-drilled track that can be installed throughout the vehicle and used to secure retractors or tie-downs to the floor and walls. The versatility of L-Track gives operators the freedom to accommodate virtually any 4-Point Securement location.
-
Vehicle Applications: School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
-
Warranty: 1 year* limited warranty coverage.
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
FEATURES- PRE-DRILLED - All 3 profiles of L-Track feature standard 82º countersunk holes pre-drilled every 4” (102mm). Each hole accommodates 5/16” (8mm) bolts. Special drilling patterns available, contact us for information.
- STANDARD LENGTHS - All 3 profiles of L-Track are available in multiple lengths. Special lengths available, contact us for information.
- DURABLE, LOW MAINTENANCE - Constructed from aluminum alloy (606
- By unknown
Specifications
Vehicle model
Brand
Has written warranty
Items included
Warranty
Warranty information
Similar items you might like
Based on what customers bought
GUIDERAIL 2' $879.77 Was $931.29
$87977current price $879.77, Was $931.29$931.29GUIDERAIL 2'
Snug Shades™ Car Sun Visor Organizer – Magnetic Sunglasses Holder Multi-Purpose Card Storage $9.99
$999current price $9.99Snug Shades™ Car Sun Visor Organizer – Magnetic Sunglasses Holder Multi-Purpose Card Storage
Weatherguard Tie Down Loop - 7883 $61.45
$6145current price $61.45Weatherguard Tie Down Loop - 7883
DOMETIC CONVERSION KIT $100.00
$10000current price $100.00DOMETIC CONVERSION KIT
AP Products 11408 Radius Insert Molding $48.31
$4831current price $48.31AP Products 11408 Radius Insert Molding
T4 Manifold 2 bolt type Wastegate Adapter 45 degree flange $84.90
$8490current price $84.90T4 Manifold 2 bolt type Wastegate Adapter 45 degree flange
Taramps VTS5.1 Voltmeter $19.00
$1900current price $19.00Taramps VTS5.1 Voltmeter
14" Flat Air Cleaner Base - Dominator $52.95
$5295current price $52.9514" Flat Air Cleaner Base - Dominator
Bessey 3100736 Pressure Plate for Clamps "Standard", Silver $42.95
$4295current price $42.95Bessey 3100736 Pressure Plate for Clamps "Standard", Silver
SINGLE AWNING SWITCH ASSEMBLY WITH $49.38
$4938current price $49.38SINGLE AWNING SWITCH ASSEMBLY WITH
Series L Track Double Lug Stud Fitting 8 Pack| FE200739 $54.00
$5400current price $54.00Series L Track Double Lug Stud Fitting 8 Pack| FE200739
CARGOGLIDE 600 - 56' LONG / 75% / 6 $899.99 Was $1,036.67
$89999current price $899.99, Was $1,036.67$1,036.67CARGOGLIDE 600 - 56' LONG / 75% / 6
MotorGuide 665171 6 Neat Cleat $69.99
$6999current price $69.99MotorGuide 665171 6 Neat Cleat
PIN FOR SWIVEL CUP SCREW JACK $20.95
$2095current price $20.95PIN FOR SWIVEL CUP SCREW JACK
TAB 1X6 - NON POWDER COATED $78.95
$7895current price $78.95TAB 1X6 - NON POWDER COATED
RollpaX Mounting Hardware $109.95
3 optionsAvailable in additional 3 options$10995current price $109.95RollpaX Mounting Hardware
SCREW JACK BOLT 14in X 1in -8 COURSE $40.95
$4095current price $40.95SCREW JACK BOLT 14in X 1in -8 COURSE
L fitting wastegate block off flange $20.90
$2090current price $20.90L fitting wastegate block off flange
TH 180/180C/4L30E, Band RIGID, Low 1969-Up $33.58
$3358current price $33.58TH 180/180C/4L30E, Band RIGID, Low 1969-Up
393761 DEFLECTOR $11.95
$1195current price $11.95393761 DEFLECTOR
Check out these related products
OMNI Flush Mount L-Pocket 4 PACK | FE201163 $155.00
$15500current price $155.00OMNI Flush Mount L-Pocket 4 PACK | FE201163
Replacement Automatic QRT Standard Retractor (single knob) Mounted with L-Track Fitting | Q8-6201-L $138.95
$13895current price $138.95Replacement Automatic QRT Standard Retractor (single knob) Mounted with L-Track Fitting | Q8-6201-L
Replacement Fully Automatic QRT Standard Retractor (single knob) Mounted with Slide 'N Click Fitting | Q8-6201-SC $184.95
$18495current price $184.95Replacement Fully Automatic QRT Standard Retractor (single knob) Mounted with Slide 'N Click Fitting | Q8-6201-SC
4 QRT Max Retractors with Slide 'N Click Fittings | Q-8301-SC $752.00
$75200current price $752.004 QRT Max Retractors with Slide 'N Click Fittings | Q-8301-SC
4 QRT Max Retractors with L-Track Fittings | Q-8301-L $548.00
$54800current price $548.004 QRT Max Retractors with L-Track Fittings | Q-8301-L
4 QRT Standard Retractors with Slide 'N Click fittings; and Manual Lap & Shoulder Belt | Q-8200-A-SC $695.95 Was $789.00
$69595current price $695.95, Was $789.00$789.004 QRT Standard Retractors with Slide 'N Click fittings; and Manual Lap & Shoulder Belt | Q-8200-A-SC
4 QRT Standard Retractors with Slide 'N Click fittings; and Retractable Lap & Shoulder Belt Combo | Q-8200-A1-SC $839.25
$83925current price $839.254 QRT Standard Retractors with Slide 'N Click fittings; and Retractable Lap & Shoulder Belt Combo | Q-8200-A1-SC
4 QRT Max Retractor Slide 'N Click fitting Manual Lap & Shoulder Belt | Q-8300-A-SC $861.00
$86100current price $861.004 QRT Max Retractor Slide 'N Click fitting Manual Lap & Shoulder Belt | Q-8300-A-SC
4 QRT-360 Retractors with L-Track Fittings and Manual Lap & Shoulder Belt with L-Track Fitting | Q-8600-AT-L $989.00
$98900current price $989.004 QRT-360 Retractors with L-Track Fittings and Manual Lap & Shoulder Belt with L-Track Fitting | Q-8600-AT-L
QRT Deluxe Retractors/Slide 'N Click fittings; & Retractable Lap & Shoulder Belt Combo | Q-8100-A1-SC $890.00
$89000current price $890.00QRT Deluxe Retractors/Slide 'N Click fittings; & Retractable Lap & Shoulder Belt Combo | Q-8100-A1-SC
Dental Lab Vacuum Molding Forming Machine Motor Former Heat Thermoforming Equipment 800W $107.20
$10720current price $107.20Dental Lab Vacuum Molding Forming Machine Motor Former Heat Thermoforming Equipment 800W
4 QRT-360 Retractors with Slide 'N Click Fittings and Manual Lap & Shoulder Belt with L-Track Fitting | Q-8600-AP-SC $1,236.00
$1,23600current price $1,236.004 QRT-360 Retractors with Slide 'N Click Fittings and Manual Lap & Shoulder Belt with L-Track Fitting | Q-8600-AP-SC
35K RPM Electric Micromotor Polishing Unit Teeth Nail Wood Polishing Handpiece $76.99
$7699current price $76.9935K RPM Electric Micromotor Polishing Unit Teeth Nail Wood Polishing Handpiece
Non-Retractable Fixed-Point Shoulder Belt with Height Adjuster | FE200710HA $87.00
$8700current price $87.00Non-Retractable Fixed-Point Shoulder Belt with Height Adjuster | FE200710HA
