*REMOVABLE CUTTER ROTOR-BOR*
Air drill driven tool made to cut out the spot welds holding the original equipment alignment plate to the top of strut towers. Once the plate is loosened caster and camber can be adjusted. Sold with 3/8" and 5/16" removable cutters. Use our “Cool Tool” cutting fluid for longer cutter life.
*FORD 3/8" DIAMETER ROTOR-BOR*
Use this air drill driven tool to cut out the spot welds holding the original equipment
alignment plate to the top of the strut tower of all Taurus/Sable/Windstar vehicles. Once the plate is loosened caster and camber can be adjusted.
*ROTARY FILE SET*
High quality carbide rotary files, ideal for elongating strut holes on many vehicles. Use
when installing 82110, 82120, and 87350 adjusters. May be used with 1/4" or 3/8"
drills at high speeds. Available individually. Use our “Cool Tool” cutting fluid for longer cutter life.
*GM STRUT SERVICE SET*
This kit offers everything necessary for servicing GM “W” body vehicles. Kit includes strut
retaining tool needed to maintain strut tube alignment with the coil spring while the strut is disassembled. Includes the tools necessary for removing and installing gas charged or oil filled strut cartridges. Lets you work through the strut tower while it is still on the vehicle. Packaged in a durable plastic case.
*MACPHERSON STRUT SPRING COMPRESSOR*
This compressor allows for safe, economical compression of MacPherson strut springs. Hooks are designed to lock the coil in place. To be used on all struts except those with vinyl coatings. Use of both hooks per spring is required. Maximum jaw opening of 230mm.
*INTERNAL COIL SPRING COMPRESSOR*
A handy chrome-moly steel compressor designed to fit inside most coil springs with an internally mounted shock. Will accommodate spring lengths from 8-1/4" to 14". It can be use on any coil spring with a minimum inside diameter of 3-3/8” to a maximum inside diameter of 5-5/8" and wire diameters up to 3/4".
*UNIVERSAL SPRING COMPRESSOR*
This two-piece internally threaded spring compressor is a great option for MacPherson strut, coilover, and other accessible springs. With 7" of travel and a 6,000 lbf max working load with a 3x safety factor, this is an ideal tool for almost any spring. Vinyl coated ends protect the spring from damage, safety jaws keep the compressor stabilized on the spring, and the ball bearing load surface makes compression easy using simple hand tools. Use of both hooks per spring is required.
*FRONT STRUT TOOL*
This tool was designed for turning the valves on adjustable damping struts when our SPC Adjustable Strut Mounts are used on BMWs and Mini Coopers.
WARNING: 