Sensch 1500W Pure Sine Wave Inverter 12V DC to 110V AC Converter for Home, RV, Truck, Off-Grid Solar Power Inverter 12V to 120V, AC Hardwire Port, Remote Controller

The Sensch 1500W 12V Pure Sine Wave Inverter is perfect for most off-grid systems, whether for a van, semi-truck, 5th wheel, cabin, or any remote location needing power. The 2000W Pure Sine Wave Inverter converts DC Power stored in batteries into the AC Power that allows you to power your household appliances. The advanced Sensch pure sine wave technology will allow you to power just about any AC appliance without risk of damage to even your most sensitive equipment. It is a reliable source of electricity for various appliances, including high inductive loads, with no strange buzzing sounds when your electronics are turned on and allows for smooth operation.


Specifications:
Inverter Output Specifications
Continuous Output Power: 1500W
Peak Power Rating: 3000W
Output Voltage: 120V
Output Frequency: 60 Hz ± 0.1%
AC Output Sockets: 1
Power Output Control: AC On/Off Switch, and Remote Control
Output Waveform: Pure Sine Wave
Nominal Efficiency: > 89%
Input Specifications
Nominal Input Battery Voltage: 12V
Low Battery Alarm: 10.5V ± 0.5V DC
High Voltage Alarm: 16V
Battery Low Shutdown: 10.0V ± 0.5V DC
Battery Over Voltage Shutdown: 16.5V ± 0.5V DC
No Load Current Draw:
Accessories
Cable: 5 AWG*2 1.64ft
Inverter Remote Control*1
RJ45 Receiver*1


FAQ
1. - Can I use the inverter with a 24V system?

- No. This model can only work with 12V battery system.

2. - Can I use this inverter to charge my batteries?

- No. The Sensch 12VDC to 120VAC inverter can only convert DC power to AC power.

3. - What size inverter should I buy?

- a. Sizing the right power output.
Inverters will be rated by a wattage value, telling you how many watts it can run at one time. For example, imagine you had a 400 Watt Fridge and 600 Watt Air Conditioning. These two items would be 1000 Watts and would require an inverter with a higher wattage than 1000W. Sensch 1500W inverter will meet your power needs.
b. Check your battery voltage.
The DC voltage rating on the inverter will tell you what battery bank it is compatible with. For example, a 12V battery bank will require an inverter that is compatible with 12V DC input.
c. Size your installation spaces.
What area or space will you set your inverter? Make sure the inverter will fit in the space you have in mind with enough room around it for proper ventilation and no fire hazards.
d. Remote operation is important.
Sensch pure sine inverters come with convenient wireless remote control (10m distance) so that you can operate the unit from afar.

4. - How do I hook up the Inverter? What size cable should I use, and is it included?

- When connecting the inverter to the battery always use the thickest wire available, in the shortest length practical. A pair of 5AWG 1.64ft cables with battery terminals is included in the pacakge.

5. - Can this inverter work with Lithium batteries?

- Yes, as long as the lithium battery is rated for 12V applications.