Toyota Tundra 09-13 2.5" Direct Fit Dual Exhaust Kit Flow II Rear Exit

This kit will convert your single exhaust system to a dual exhaust system with the option of a performance muffler and dual tail pipes on your 2009-2013 Toyota Tundra 1/2 ton applications. All Wheel Bases. 8 cyl. Our kits will give your truck the look, sound and performance you have been searching for!!
Exhaust Kit Breakdown:
2) 2.5" O.D. mandrel bend aluminized steel tail pipes. Our included mandrel bend pipes are higher flowing and longer lasting than our competitors' standard wrinkle bend pipes.1) Flow II Stainless Muffler1) Direct Fit Intermediate Pipe. This pipe features mandrel bend pipes that are welded to flanges in order to bolt directly up to your OEM system!1) 18" long 3" pipe used to connect the intermediate pipe to a muffler.8) 2.50" Clamps.2) 3" Clamps.6) Universal Hangers.0) No exit adapters are included in this kit! This rear exit kit will come out directly under the rear bumper on each side of the truck following parallel with the inside of the frame rails.0) No tips are included in this kit! This kit does however require at least 10" long tips at a minimum to properly exit the vehicle.
Please note: This system is designed to replace your factory OEM exhaust starting at the flanges after/down stream of the catalytic converters. This kit does not interfere with any emissions or emission control devices nor can it be used to do such. If your exhaust has been replaced or modified previously, fabrication to the existing exhaust on your truck may be necessary for the proper installation of our kit.
Trucks with modified suspension or body lifts may also require fabrication of the exhaust or truck for the proper installation of our kit.
This kit is designed to fit All Wheel Bases. 8 cyl. GASOLINE ENGINES ONLY!
*Product disclaimer: THIS IS NOT A COMPLETE "DO IT YOURSELF" kit. It is recommended that this kit be installed by a professional. Fabrication may be required. Any type of suspension or wheel/tire modifications may affect system clearances. Additional parts or fabrication will likely be required.