1 Pair - Choctaw Universal Black Turn Signals
Clear Lens - Amber Insert
Tired of looking at your old, over-sized Turn Signal side markers? Do you need to replace a broken OEM side marker? We have just the the turn signal for you. Upgrade with our bright Universal Stalk style Turn Signals. Our Turn Signals offer a great look with an Oval Eyed Clear Lens that has an Amber insert in front of a incandescent clear bulb. On the backside of the Turn Signals is a unique, small Amber window that allows you to see the light flashing while riding. With a Black High Impact Plastic Housing and a Rubber bendable stalk, you don't have to worry about someone (or your kids) smacking into and breaking off your turn signal. Because they're universal, you can install them on the front or rear of your Motorcycle, ATV, UTV, or Scooter.
Stats:
Dimensions: Multiple, please see photo(s)
Housing: Black High Impact Plastic, Clear Lens, Amber Insert, Clear Bulb
Stalk: Black Rubberized Stalk, Steel Mounting Stud and Nut
Wiring: Two Wire, 12 Volt Systems
Fitment Information: This is a Universal Turn Signal Light; therefore, it has multiple uses including, but not limited to: Sportbikes, Cruisers, ATV, Quad, UTV, MX, Dirt Bike, Enduro, Dual Sport, Golf Cart, and even Snowmobiles.
NOTE
: Our Choctaw Turn Signals are shown installed with our Turn Signal Adaptors that are an optional purchase and not included.
Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; depending on where you decide to mount them, it may require modification to the fairing. Once you pick a mounting location it's time to locate the existing Turn Signal Wires on your bike, you should have either a 3 or 2 wire system. If you have a 3 wire system, the wire for the running lights are not used in this installation. The other two wires on your bike will be the Turn Signal Power (Positive Wire) and a Ground (Negative Wire). Attach the Yellow Turn Signal Wire to the Bikes Positive Signal Wire and the Black Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque mounting nut when installing, it should be hand tight and not forcefully clamped down, we recommend using Threadlocker on all bolts used in a motorcycle application (Blue/Medium).
