Hero image 0 of AIM POWER PICOGLF6W12V120V 600 WATT PURE SINE INVERTER CHARGER 12 VOLT TO 120 VAC ETL LISTED, 0 of 3

AIM POWER PICOGLF6W12V120V 600 WATT PURE SINE INVERTER CHARGER 12 VOLT TO 120 VAC ETL LISTED

(No ratings yet)

Key item features

- Features:
  - 600 watt low frequency pure sine inverter
  - 1800 watt surge for 20 seconds 300% surge capability
  - AC input cable
  - GFCI outlet
  - Auto gen start capability
  - Conformal coated for marine applications
  - Multi stage smart charger 20 amp
  - Remote panel available
  - Auto frequency detect from AC input
  - Less than 10msec typical transfer time
  - Optional 25W power save mode
  - 7 battery type settings for charger
Features:
- 600 watt low frequency pure sine inverter
- 1800 watt surge for 20 seconds 300% surge capability
- AC input cable
- GFCI outlet
- Auto gen start capability
- Conformal coated for marine applications
- Multi stage smart charger 20 amp
- Remote panel available
- Auto frequency detect from AC input
- Less than 10msec typical transfer time
- Optional 25W power save mode
- 7 battery type settings for charger
600 watt low frequency pure sine inverter
1800 watt surge for 20 seconds 300% surge capability
AC input cable
GFCI outlet
Auto gen start capability
Conformal coated for marine applications
Multi stage smart charger 20 amp
Remote panel available
Auto frequency detect from AC input
Less than 10msec typical transfer time
Optional 25W power save mode
7 battery type settings for charger
Inverter Output Specifications:
- Continuous output power: 600 Watt
- Surge rating: 1800 Watt (20 Seconds)
- Output waveform: pure sine/same as input (bypass mode)
- Output voltage: 120Vac
- Nominal efficiency: 80% (peak)
- Line mode efficiency: >95%
- Output frequency: 50Hz ± 0.3Hz / 60Hz ± 0.3Hz
- Typical transfer time: 10ms (max)
- THD: <10%
- Output breaker (terminal): 7 amps
- GFCI breaker: 7 amps
Input Specifications:
- Nominal input voltage: 12.0 VDC
- Minimum start voltage: 10.0 VDC
- Low battery alarm: 10.5 VDC-11.0 VDC
- Low battery trip: 10.0 VDC-10.5 VDC
- High voltage alarm: 16.0 VDC
- Low battery voltage restart: 15.5 VDC
- Low battery voltage recover: 13.0 VDC
- Idle Consumption: <25W – depending on search mode
- Input breaker: 7 amps
Charger Specifications:
- Output voltage: depends on battery type
- Charger rate: 20A
- Over charge protection Shutdown: 15.7V
- Selectable charge setting based on battery type
- Adjustable charge current off-20%-100%
- Four stage smart charger
Transfer switch:
- Transfer load – 7 amps
- Low voltage trip: 80\90 V +/-4%
- Low voltage trip: 90\100V +/-4%
- High voltage trip: 140V +/-4%
- High voltage re engage: 135V +/-4%
- Max input AC voltage: 150
2 Year Warranty
Continuous output power: 600 Watt
Surge rating: 1800 Watt (20 Seconds)
Output waveform: pure sine/same as input (bypass mode)
Output voltage: 120Vac
Nominal efficiency: 80% (peak)
Line mode efficiency: >95%
Output frequency: 50Hz ± 0.3Hz / 60Hz ± 0.3Hz
Typical transfer time: 10ms (max)
THD: <10%
Output breaker (terminal): 7 amps
GFCI breaker: 7 amps
Nominal input voltage: 12.0 VDC
Minimum start voltage: 10.0 VDC
Low battery alarm: 10.5 VDC-11.0 VDC
Low battery trip: 10.0 VDC-10.5 VDC
High voltage alarm: 16.0 VDC
Low battery voltage restart: 15.5 VDC
Low battery voltage recover: 13.0 VDC
Idle Consumption: <25W – depending on search mode
Input breaker: 7 amps
Output voltage: depends on battery type
Charger rate: 20A
Over charge protection Shutdown: 15.7V
Selectable charge setting based on battery type
Adjustable charge current off-20%-100%
Four stage smart charger
Transfer load – 7 amps
Low voltage trip: 80\90 V +/-4%
Low voltage trip: 90\100V +/-4%
High voltage trip: 140V +/-4%
High voltage re engage: 135V +/-4%
Max input AC voltage: 150

Specs

Surge wattage
1800 W
Volts
12
Brand
AIMS Power
Features
Automatic
Has written warranty
No
Assembled product height
5.5 in

Current price is $607.00

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $59.00

4-Year Plan - $77.00

How do you want your item?

Columbus, 43215

Arrives by Sat, May 2

Sold and shipped by AIMS Corp.

4.666666666666667 stars out of 5, based on 3 seller reviews(4.7)

Report an issue with this seller

Free 30-day returns - in store or online

More seller options (1)

Starting from $607.00

About this item

Product details

This 600 watt pure sine inverter charger, ETL Listed to conform with UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency over 88%. It is packed with unique features and it is one of the most advanced inverter chargers in the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. The AC/Battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy applications. When customized to Battery priority mode via a DIP switch, the inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. When switching to battery priority mode via the DIP switch, the inverter will extract power from external power sources in renewable energy systems and a minimal cycle of the battery will be required. With the availability of the auto generator start, an electrical generator can be integrated into the system as a backup and started when the battery voltage goes low.

- Features:
  - 600 watt low frequency pure sine inverter
  - 1800 watt surge for 20 seconds 300% surge capability
  - AC input cable
  - GFCI outlet
  - Auto gen start capability
  - Conformal coated for marine applications
  - Multi stage smart charger 20 amp
  - Remote panel available
  - Auto frequency detect from AC input
  - Less than 10msec typical transfer time
  - Optional 25W power save mode
  - 7 battery type settings for charger
Features:
- 600 watt low frequency pure sine inverter
- 1800 watt surge for 20 seconds 300% surge capability
- AC input cable
- GFCI outlet
- Auto gen start capability
- Conformal coated for marine applications
- Multi stage smart charger 20 amp
- Remote panel available
- Auto frequency detect from AC input
- Less than 10msec typical transfer time
- Optional 25W power save mode
- 7 battery type settings for charger
600 watt low frequency pure sine inverter
1800 watt surge for 20 seconds 300% surge capability
AC input cable
GFCI outlet
Auto gen start capability
Conformal coated for marine applications
Multi stage smart charger 20 amp
Remote panel available
Auto frequency detect from AC input
Less than 10msec typical transfer time
Optional 25W power save mode
7 battery type settings for charger
Inverter Output Specifications:
- Continuous output power: 600 Watt
- Surge rating: 1800 Watt (20 Seconds)
- Output waveform: pure sine/same as input (bypass mode)
- Output voltage: 120Vac
- Nominal efficiency: 80% (peak)
- Line mode efficiency: >95%
- Output frequency: 50Hz ± 0.3Hz / 60Hz ± 0.3Hz
- Typical transfer time: 10ms (max)
- THD: <10%
- Output breaker (terminal): 7 amps
- GFCI breaker: 7 amps
Input Specifications:
- Nominal input voltage: 12.0 VDC
- Minimum start voltage: 10.0 VDC
- Low battery alarm: 10.5 VDC-11.0 VDC
- Low battery trip: 10.0 VDC-10.5 VDC
- High voltage alarm: 16.0 VDC
- Low battery voltage restart: 15.5 VDC
- Low battery voltage recover: 13.0 VDC
- Idle Consumption: <25W – depending on search mode
- Input breaker: 7 amps
Charger Specifications:
- Output voltage: depends on battery type
- Charger rate: 20A
- Over charge protection Shutdown: 15.7V
- Selectable charge setting based on battery type
- Adjustable charge current off-20%-100%
- Four stage smart charger
Transfer switch:
- Transfer load – 7 amps
- Low voltage trip: 80\90 V +/-4%
- Low voltage trip: 90\100V +/-4%
- High voltage trip: 140V +/-4%
- High voltage re engage: 135V +/-4%
- Max input AC voltage: 150
2 Year Warranty
Continuous output power: 600 Watt
Surge rating: 1800 Watt (20 Seconds)
Output waveform: pure sine/same as input (bypass mode)
Output voltage: 120Vac
Nominal efficiency: 80% (peak)
Line mode efficiency: >95%
Output frequency: 50Hz ± 0.3Hz / 60Hz ± 0.3Hz
Typical transfer time: 10ms (max)
THD: <10%
Output breaker (terminal): 7 amps
GFCI breaker: 7 amps
Nominal input voltage: 12.0 VDC
Minimum start voltage: 10.0 VDC
Low battery alarm: 10.5 VDC-11.0 VDC
Low battery trip: 10.0 VDC-10.5 VDC
High voltage alarm: 16.0 VDC
Low battery voltage restart: 15.5 VDC
Low battery voltage recover: 13.0 VDC
Idle Consumption: <25W – depending on search mode
Input breaker: 7 amps
Output voltage: depends on battery type
Charger rate: 20A
Over charge protection Shutdown: 15.7V
Selectable charge setting based on battery type
Adjustable charge current off-20%-100%
Four stage smart charger
Transfer load – 7 amps
Low voltage trip: 80\90 V +/-4%
Low voltage trip: 90\100V +/-4%
High voltage trip: 140V +/-4%
High voltage re engage: 135V +/-4%
Max input AC voltage: 150

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Surge wattage

1800 W

Volts

Brand

AIMS Power

Features

Automatic

Warranty

Warranty information

For specific warranty information, see product specifications. After 30 days from date of invoice, defective product may be returned for repair or exchange only. No refunds after 30 days. AIMS will review the condition of ALL returned product. AIMS does not refund any shipping fees. See return policy.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.