3/4" Clutch for #35 Chain with Hardware

Centrifugal clutch for 3/4" shaft engine with upgraded mounting hardware. Shaft size: 3/4" Bore Chain Size: #35 Chain Tooth Count: 12 Tooth Engagement is Approximately: 1800-2200 RPMs Replace your worn out clutch with this affordable item. Can be mounted inboard or outboard. Has key stock. Comes with upgraded mounting hardware - no need to use set screws. Fits the following motors and many others: Fits Honda GX160 Fits Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc Nearly all 5.5 HP clones Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands. PLEASE MEASURE YOUR CRANKSHAFT TO BE SURE! Know your gear ratio! An acceptable gear ratio for a 12T #35 clutch would be a 60T or larger rear sprocket. A 10T #41 clutch would need a 50T or larger rear sprocket. Vehicles with rims larger than 6" or tires with a diameter of 15" or larger should upgrade to a belt drive TAV system. Gear ratios outside of these recommendations voids any warranty.