5/8 Inch Wheel Stud and Double Sided Lug Nuts Kit, Coarse Thread

Oversize 5/8 Coarse Wheel Stud, Long Knurl Knurl Length: 0.900" Overall Length: 2.75" Thread Length: 1.200" Thread Pitch: 5/8"-11. Wheel Lug Nut, Steel 5/8 Inch RH Coarse Thread Double Taper Use these oversized 1 Inch Hex Steel lug nuts in place of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening. You will need a 1" hex (6-sided) socket.  5/8-11" Coarse Thread fits most racing wheels. Oversized design for increased strength and durability. 45° taper. 5/8-11" RH Coarse Thread, Double Taper. What's The Angle Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong. If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels. Speedway Motors Drill Bit for 5/8" Wheel Studs 43/64" wheel stud drill bit with 1/2" shank. Used to drill out hubs and axle flanges for 5/8" wheel studs with .685 knurl diameter.