Rechargeable Bike Alarm with Remote, USB C Charge Wireless Bicycle Vibration Motion Sensor Anti Theft 110dB Loud Security Alarm System for Vehicle Trailer Motorcycle IP65 Waterproof

Specification

An alarm: Built-in a 3.7V 2000mAh rechargeable battery up to 3 months ( included ) standby for 6 months.

A remote: a 12V/27A alkaline battery ( included ) standby for over 1 year.

Wireless range: 20 meters

Working environment temperature:-20~60 degree

Working environment:<80%

Storage temperature:-30~70 degree

Function:Arming and disarming,Adjusting touch sensitivity,Changing the electrical bell sound,Searching vehicle,SOS functions,Battery low indicate

The program to power on for first use

1.Press and hold the arm key of the remote until the alarm sounds a short "Bi"

2.Shake the alarm and you will hear 3 times short "Bi", it shows that the alarm is powered on and can be used normally.

The program to adjust 7 level touch sensitivity

1.Long press disarm key of the remote until the LED light of remote long brights, then press arm key, the sensitivity will adjust from high level to low level.

2.There are 7 different kinds of tones (do re mi fa sol la si ) corresponding to different sensitivity levels. "Do" is the highest sensitivity level.

Note:an alarm can pair maximum 8pcs remotes.

Pair the first remote: remove the battery of the alarm, 30 seconds later install the batteries, then long press the ringtone key of the remote, after the alarm sound "Bi", press the arm key of the remote, the alarm will sound "Bi...Bi" to remind everything is fine.

Pair another remote: press disarm key of the first remote to make the alarm in disarm mode, then long press the ringtone key of the first remote. After the alarm sounds "Bi", press the arm key of the new remote, the alarm will sound "Bi...Bi" to remind everything is fine.