2X Wheel Adapters ¦ 6x5.5 (6X139.7) To 5X150 ¦ 14X1.5 ¦ 2" INCH 50MM

Spacer Width: 50mm (2 Inch) each side Quantity: 2 Pieces Bolt Pattern: Allowing 6X139.7 (Factory Hub) to Fit 5X150 (Wheel) Center Bore: 108 to 110mm Thread Pitch: 14mm X 1.5 Spacer Type: Wheel Adapters W/ Wheel Centric Lip (110mm) Pre-assembled With Pressed Grade 8 Studs This spacer set includes open end lug nuts to secure the spacers onto your factory hubs This spacer set includes open end lug nuts in 14x1.5 thread pitch to secure the spacers onto your factory hubs. If your vehicle has different threads, you will need to purchase another set of the open end lug nuts to complete the installationInstallation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failureTest fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)Be sure to retorque the adapters after 20-25 miles of driving**The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase