TOOL1SHOoo 10L Pneumatic Transmission Gear Oil Fluid Extractor Vacuum Pump Transfer Tool

【Product Description】

The TOOL1SHOoo dual-action pneumatic transmission fluid pump is used to extract,deliver and dispense transmission fluid quickly,cleanly,safely,and non-sparking.It is simple to operate and eliminates the need for tedious and laborious manual work with an air compressor.Equipped with a wide range of adapters,it will be the ideal tool for your oil changes.

【Key Feature】

Durable and sturdy——This product uses plastic oil barrels,copper joints,PU oil pipes,and stainless steel adapters coated with plastic,which have good rust prevention,corrosion resistance,aging resistance,wear resistance,and impact resistance.

Dual function——The consistent switching between the blue spiral valve and the inlet ball valve allows for dual operation of pumping and refueling to improve your efficiency.

Safety protection——The safety valve allows automatic pressure relief after the pressure reaches 8 bar to prevent explosion and ensure safety.

User friendly design——The oil outlet pipe(6.56 feet)and suction pipe(3.28 feet)can be directly inserted into the vehicle's fuel tank or dipstick tube to extract or fill transmission oil,without the need to jack up the vehicle or crawl under it.

Thoughtful design——Quick plug connectors can be quickly connected with just a simple buckle.When not in use,it can lock the valve to avoid oil leakage.

Adjustable flow rate——The flow control valve can freely adjust the pumping speed according to your needs.

Multiple adapters——Equipped with 13 adapters,suitable for most transmission models.

【Specifications】

Color:White,Blue,Black

Purpose:Oil Change

Process:Plastic Spray

Type:Pneumatic Gearbox Oil Changer(Uncharged)

Rated Air Pressure:8-12bar

Safe Pressure:8 bar

Length of Oil Suction Pipe:2m/6.56ft

Length of Oil Outlet Pipe:1m/3.28ft

Air Inlet Diameter:1/4"PT

Average Air Conditioning Capacity:2CFM

Maximum Capacity:10L/2.64gal

Temperature Range:-19°C~60°C/-3°F~140°F

Material:Copper,Plastic,PU,Stainless Steel

Gross Weight:4.3kg/9.48 lbs

Oil Barrel Size(φ*H):24*42 cm/9.45*16.53 in

Plastic Box Size:26*21*5.5cm/10.24*8.27*2.16in

Package Size:28.5*24.5*53 cm/11.22*9.65*20.87 in

【Package】

1*Pneumatic Transmission Fluid Pump

3*Oil Outlet Pipes

1*Oil Suction Pipe

13*Adapters

1*Carrying Case

2*English User Manuals

All Accessories Required For Use

【Notes】

1. This product is suitable for use from 8 bar to 12 bar, high pressure is prohibited. It is not suitable for highly corrosive, highly concentrated, and high-temperature petrol and liquids.

2. Please ensure that all parts are tightly connected, and we recommend that always wear a protective mask and goggles(not included) when operating.

3. Close the screw valve clockwise when refueling, while the valve is at low pressure; open the screw valve counterclockwise when pumping, while the valve is at high pressure. The blue spiral valve must be in line with the air control on/off valve.

4. If you find that the oil suction or discharge is slow after several uses, check the blue screw valve. The flow rate can be restored by grinding the threads of the cap shorter.

5. After receiving the gearbox oiler, the cover must not be unscrewed, because the pressure is set at the factory. If it is unscrewed, it will pump slowly and add slowly. You need to return to the factory for debugging. In case of insufficient suction, check the sealing condition of each component.