SkylinkHome Motion Activated Light Starter Kit, Screw In (SK-9)

FOR USE WITH THE SKYLINKHOME WIRELESS CONTROL SYSTEM: The Motion Activated Light Kit contains everything you need to turn a light on automatically when movement is detected. All wireless signal communications within the SkylinkHome System are based on rolling code technology to ensure the highest level of security. How It Works: The Dimmer simply screws into your existing light bulb socket, and a light bulb screws into the Dimmer. The Dimmer can receive signals from Skylink transmitters, allowing you to wirelessly operate the connected light. For example, you can install the included Motion Sensor transmitter near an entrance, so when anyone enters the room, the Motion Sensor signals the Dimmer to turn on the light. The Dimmer can receive signals from up to 8 transmitters, so you can add remote control transmitters, wall mount transmitters, etc. for added convenience. (Additional transmitters sold separately.) Kit Includes: ~ Motion Sensor: ID-318 ~ Screw In Dimmer: LX-318 ~ Clamshell Pack Kit Features: ~ Save energy by turning ON/OFF lights automatically. ~ Turn on the lights by movement when dark. (Movement will not turn on the lights when room is already bright.) ~ Selectable timer from 5 to 60 minutes. ~ Works with Incandescent and CFL bulbs, up to 60W load. ~ Wireless remote control range is up to 500 feet in open area. ~ No installation required, just screw in a lamp socket. Motion Sensor Features: ~ Activated the Dimmer when motion is detected ~ Turn lights off by timer automatically after 5, 30 or 60 minutes. ~ Can be set to only turn lights on when dark. Energy saving plus. ~ Adjustable motion detection sensibility. ~ Water resistant. Good for outdoors and indoors. ~ Up to 500 feet operating range in an open area. Long range, no problem. Screw-In Dimmer Features: ~ No wiring connection, just screw in to a lamp socket ~ Lighting control: ON/OFF/Dim ~ Operates up to 60W load - Incandescent light bulbs, CFL, LED bulbs. ~ Up to 500 feet operating range