LLPT Double Sided Tape Mounting Tape 1/2" x 18 Feet Heavy Duty Waterproof Black Foam Tape for Home Office Automotive (G595213mm)

PRODUCT FEATURES: LLPT very high bonding tape (1.2mm/0.047" thick) is double coated pressure sensitive adhesive tapes for bonding a wide variety of substrates including lower surface energy materials and smooth surfaces, such power coated paints, glass, marble, plastic, tile, wood and lamination; but not good to heavy textured surfaces and painted walls (taken off paints while removal). Excellent temperature resistance, water moisture resistance, permanent bonding strength.

APPLICATIONS: LLPT industrial mounting tape has strong strength that can withstand moderate to heavy strength and it's widely used for car trims, registration plates, name plates, address plaques, signs, metal mailbox, hangers, toothbrush holder, home projects, wall arts, home decoration, LED strips, generator hour meters, car wind protector, motion sensor, fake nail box and so on. Adhere the tape VERTICALLY on the back of object with firmly press; object depths should not EXCEED 0.75”.

PERMANENT GUIDELINES: For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.

CURING PROCESS: LLPT Heavy Duty Mounting Tape is a new alternative to screws or nails. The conformable double sided tape sticks to smooth surfaces (DO NOT STICK TO ANY TYPE OF PAINTED WALL OR HEAVY TEXTURED SURFACES), weatherproof permanent bond, suggest using ADHESIVE PROMOTER together to increase its initial bonding. It might cause damage or leave residue after dwelling 72 hours on object while removal. A sharp tool is needed if you need to remove and clean with adhesive remover. Warm up the adhesive in cold weather.

HOW TO REMOVE: Remove the tape with adhesive remover, spray the adhesive remover around the bonding surface, scrap the tape and residue with plastic scrapper for a neat removal.