Illume 42 in. x 78 in. Wall Hinged Glass Shower Enclosure

[This review was collected as part of a promotion.] We had some pipes burst in our master bathroom as a result of the Texas winter storm this past February – and the silver lining is a brand new bathroom! This shower door was a critical component of our bathroom remodel – it looks gorgeous. The glass is thick, and I love that it's been treated with Enduroshield to help keep water spots to a minimum (a lovely feature that our previous shower glass did not have!) The hardware is sturdy and the hinges are smooth. We selected matte black for the hardware color, and the color matches the other matte black hardware elements we selected (shower trim, etc.). Our contractor installed it – and reported back that it was an easy install with no surprises or complaints. The only thing to keep in mind is the box with the door in it was very heavy – you'll definitely need two people to move it. I'm impressed with this shower door and would recommend Glass Warehouse to anyone looking to do a bathroom remodel, or replace their shower door.

[This review was collected as part of a promotion.] I'm very impressed with this shower door. The glass is pretty thick at 3/8”, and you can tell it's got resistant coating because after a few weeks of use, there's no visible spotting. We do use a squeegee after use, most of time. The hardware is extremely heavy, you can really notice the heft of the hinges and handle before you install them, and the chrome plating looks flawless. My only gripe, and it's a minor one, is that the hard rubber blocks supplied with it were very hard but not quite hard enough. They are used to set on the floor under the door, and the instructions state that they will set the door to the proper height while marking the holes on the wall, for the hinges. My experience was that the blocks squished slightly, so the door was actually set slightly lower than it should have been, because when I installed the door sweep on the bottom (last step after hanging the door), the sweep is a little tight against the floor. This can be avoided by drilling the holes in the tile about 1/16-1/8” higher than the holes you marked. But this installation gripe aside, I'm very happy with the build quality.