Media enhancement by M-Pleating, increases Dust Holding Capacity (D.H.C) and reduces pressure drop. The zigzag pleating pattern provides more filtration area allowing more dust holding capacity (DHC). Additional filtration area gives the oil more room to flow, resulting in lower pressure drop. The media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes Forming tapped thread for easy installation and spin-on. Pre-lubricated gasket. The gasket is lubed from the factory to aid installation. The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection. Standard features plus the following:. Heat-resistant Anti-Drainback valve (ADBV). Unlike standard nitrile rubber, silicone rubber has a higher heat-resistance. The enhanced ADBV will prevent dry starts and provides durability throughout the extended life of the filter. 17mm Hex Nut. Easy for service and removal after prolonged usage. The nut is designed for safety wire attachment if needed. 16 Weld spots for higher nut fatigue strength. +30% Gauge thickness for higher burst strength. Oval inlet hole for even lower flow resistance. Assembled product height: 5.71 Inches. Assembled product length: 3.07 Inches. Assembled product width: 3.07 Inches. Assembled product weight: 0.18 Pounds
WARNING: 