Auto Liquid Testing Brake Fluid Tester Pen 5 LED Indicator Display For DOT3/DOT4 Oil Electronic Tester Dot5 Brake Fluid Pen G2H8

Specification:

Brand new

Type: Brake Fluid Tester

Material: Plastic

Color: As the pictures shown

Quantity: 1PC

Main function: Check the car brake oil quality



Features:

Quick and easy way to test for moisture content in the brake fluid; results appear in seconds;

Sturdy design: the tester has been greatly improved.

Widely use: Testing dot3, dot4, dot5 brake fluid.



LED Indicator Display:

The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified

The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later

The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced

Red LED: change brake fluid

LED red flashing: replacement

LED yellow: low moisture content, check again in six months

LED green: brake fluid lines / cell row



Technical parameters:

Green: OK, that is, brake fluid does not contain water

Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.

Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.

Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.

Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.



How to use:

Step 1. Turn on the brake fluid tester by pressing the button. A green light should light up. If the light does not come on, it may be time to change a battery.

Step 2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester.

Step 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid.

Step 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly.

Step 5. The tester will automatically power off after 12 seconds of inactivity.



Package Included:

1 * Brake Fluid Tester(Not Battery Included)