Pecification:
Manufacturer Part Number:K9 LED headlight
Plug Type: 9005/HB3 + 9006/HB4,High Beam + Low Beam
LED Quantity(each bulb): 4pcs* COB chips
Wattage: 200W/Pair, 100W/Bulb
Hight luminous efficacy Flux：12000LM/Pair, 6000LM/Bulb
Color Temperature: White 6000K
Waterproof: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Voltage:9V to 36V.Wide-range voltage，constant urrent control，anti-interference circuit design.
Apprication:Upgrade for Car，Truck，SUV，RV Xenon Headlight，ALL IN ONE Style, no extra driver needed .
Long range：6000K color temperature and 200m light range.
NEW Mini Hi-Low Beam LED headlight conversion kit.
Description:
1. High brightness: The latest COB with 6000K cold white LED chip; 200% brighter than the existing halogen headlights.
2. Strong heat dissipation: equipped with highly silent heat dissipation fan, speed up to 12000/min, heat
dissipation efficiency, can avoid temperature accumulation on the beads, prolong the service life of the beads.
3. Simple Installation: Installation only takes 10 minutes. There is no relay. There is no capacitor. No additional
wiring. Plug and play.
4. IP68 waterproof: using integrated radiator and aluminium body self-cooling, waterproof and heat-proof. Even in extreme cases, the enclosure of the rainproof driver can work properly. Automatic short circuit protection.
5. Luminous on all sides: 360 ° no dead angle.
Package Content:
2x 9005 LED HeadLight Bulbs
2x 9006 LED HeadLight Bulbs
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
