Packing List:
1 x Dent Lifter
1 x Glue Gun
2 x10 Glue Pulling Tabs
10 x Hot Melt Glue Stick
1 x Tool Bag
1 x Plastic Shovel
1 x Plastic Bottle（Empty）
1 x Clean Cloth
Easy To Control - DIY can removal the dent by yourself, Suitable for any person to operate, It has the advantages of simple operation, repair the dent for you directly.
Padded feet add support for maximum pulling power and unit allows for controlled leverage while removing dents the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
About Golden Dent Lifter
1.Aluminum body
2.Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4. One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5. With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
About Glue Gun
Material: Plastic & aluminum for the glue gun.
Color: Blue color
Working Power: 20W
Steps for usage:
1. Clean the surface with a clean damp cloth.
2. ut the glue stick to gun and connect the power source and preheat for 5-10 minutes.
3. According to the dent size to choose the Glue Puller Tab, then put the heated glue on the puller tab, immediately place the puller tab in the center of the dent and hold on until it sticks.
4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
5. After the glue cooling, use a golden dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappears.
6. After finishing the dent, use the 95% alcohol to clean the residual glue which on the car surface with a plastic shovel.
