TECHTONGDA Sanitary Strainer 3/4"NPT Stainless Steel Silver Filter Housing for 20" Cartridges w/Bracket Wrench Pin

✔Description：
This is a heavy duty，72 psi rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment.
Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
The liquid is pumped into the filter by the pressurization of the liquid, and the liquid is filtered by the filter to remove various tiny particles, colloids, metals, bacteria and other impurities in the liquid.
Filtered impurities are intercepted by the filter, a clean liquid through the filter out of the filter.
Notice：This item is Filter Housing ONLY!


✔Specifications:
3/4"NPT Full Port inlet and outlet.
Maximum strength and durability.
Especially suitable for applications where solenoid valves are used and frequent water hammer occurs.
For high flow rates and minimal pressure drops
Size of pakage: 25.5*6.6*6.6in.
Weight：6.51 LB
Includes mounting bracket and wrench pin.


✔Features：
1. Good filter performance.
2. Corrosion resistance, heat resistance, pressure resistance, good wear resistance;
3. Stainless steel filter pores stomatal accuracy of accurate filtration;
4. Stainless steel filter unit large flow rate;
5. Stainless steel filter for low temperature, high temperature environment; can be reused after cleaning.


✔Item Included：025175
TECHTONGDA Sanitary Strainer 3/4"NPT Stainless Steel Silver Filter Housing for 20" Cartridges w/Bracket Wrench Pin