Stone Care International Granite and Stone Sealer - Flexible Industrial Sealant - 24 Ounce

Spray, wipe and seal; it's that easy. This granite & stone sealer is professional-quality you can easily apply at home. It's specially formulated to protect stone surfaces from water and staining while allowing the stone to breathe and release moisture vapors. Directions: shake well before use. Always test a small area before using. For maximum protection the stone surface should be dry for 6-12 hours before sealing. 1. Clean stone surface with stone care international cleaner before sealing. 2. Cover areas that are not intended to be sealed. 3. Liberally spray entire surface until it is evenly wet. Do not SATURATE the surface. 4. Allow surface to begin drying for 3-5 minutes, wet the surface once more with the sealer to allow the sealer to properly penetrate and cure. 5. Wipe off excess sealer from surface after 30 minutes. If excess sealer dries onto the surface, spray more sealer onto the surface and wipe immediately with a clean, dry terrycloth towel. For more porous stones repeat steps 2-6 one hour after the first application.