Glidecoat’s Nano Polish offers a fast, easily achievable, perfect finish, using fewer products, and fewer stages than traditional polishing systems. This nano coating is perfect for cars and boats. It can be used on gel coat, clear coat, paint, chrome, polished aluminum, plexiglass, glass, and all non-porous surfaces to remove water spots, light oxidization, swirls, and scratches.
Only damaged fiberglass or paint molecules are removed by the polish as to not compromise the durability of your vehicle’s finish, as harsh polishing compounds do.
This product does not contain wax or silicone.
BENEFITS
- One product does the work of two – cleans and polishes
- Contains no wax or silicone
- Smaller active particles help minimize surface heat during the polishing process
- More active particles allows polish to work faster
- No fillers unlike other competitive products
- Can be used on freshly painted surfaces after wet/dry sanding 1500-2000 grit
- Designed to work with Glidecoat Nano Compound
- Ideal product when applying Glidecoat Professional Top Coating or Marine Ceramic Coating
STORAGE AND USAGE INSTRUCTIONS
- Make sure that the surface you are working on is not in direct sunlight and ideally cool to the touch.
- Shake the bottle vigorously before using.
- Make sure polishing pads are clean and free from particulates before use.
- Make sure any surface you are working on is clean and contaminant free otherwise you will introduce new scratches on the surfaces while polishing.
- If using a rotary tool to apply the polish, in the first instance, try using a medium foam pad. If the results you achieve by doing this are satisfactory then there is no need to use a more aggressive wool pad.
- When using the wool pad, ensure the fibers do not get clogged by excess product. Clean the pad in a bucket of water or using a jet wash and make sure the pad is dry before use.
- Always keep a film of Nano Polish on the surface of the pad. If a pad is used without polish on it, not only will it not be polishing, it may also harm the paintwork or fiberglass.
- If the polish dries out on the surface as you are polishing, spray the surface with a mist of water and this will reactivate the polish.
- It is best to polish with a rotary tool at between 900 and 1,200 rotations per minute (rpm).
- When finishing polishing always use the soft foam pad at a low rpm, this will remove any machine lines caused by the more aggressive wool pad.
- Glidecoat Nano Polish has a shelf life of 2 years from purchase. For best results, use within 6 months of opening.
