Features:
*Use our digital voltage gauge to accurately measure voltage, 2-line design, which is convenient for wiring and reverse connection protection.
*No external power supply -use measurement voltage as a power supply. Measurement range: DC4.5V-30V.
*Bright and clear LED display panel for easy reading. The automatic movement display is convenient.
*When there are a small amount of errors, the potentiometer on the circuit board is calibrated.
*High measurement accuracy, good stability, and convenient installation. Wide application
* Low working voltage, red 4.5V, green 4.7V, blue 5.0V
Specification:
Model: DSN-DVML-368-2
Measurement range: Red DC4.50-30.0V, Green DC4.70-30.0V, Blue DC5.00-30.0V
Power supply scope: No need to supply a power supply, directly use the test voltage as the power supply, the range is the same as above
Maximum input: DC30.0V. Note: If the input voltage is higher than 30V, it may be damaged!
Allow error: ±1%;
Input impedance:> 100KΩ
Work current: red <23ma, green <18mA, blue <13ma
Refresh speed: about 300ms once
Display: Three -bit "0.36" LED digital tube
Show color: red, green, blue optional
Line length: 15cm
Dimensions: 23 x 15 x 10 mm, length X width X thickness (excluding mounting ears); including mounting ears Length: 33mm
Open hole size: hole distance: 28mm, hole diameter: 2.8mm
Net weight: 4.7g
Working temperature: -10℃~65℃
Package included:
1*LED voltage table
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
