Specifications:
1.Plug Type: 9005/HB3+9006/HB4
2.LED type: COB LEDs
3.Power: 100W/set(50W/bulb)
4.Luminous Flux: 10000LM/set(5000LM/bulb)
5.Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
6.Color Temperature: 6000K-6500K White
7.Beam Angle: 360°
8.Operating Temperature: -40 - +80°C
9.Operating Life: >50000hrs
11.Number of Bulbs: 4
12.To Fit: High + Low Beam Head Lights KIt
13.Placement on Vehicle: Left,Right,Front
14.Material: Aviation 6063 Aluminum Profile
15.Application: Headlight,Fog light (High + Low Beam Head Lights )
Features:
1.100% New and Never Used
2. Super bright COB chip(USA),360 degree clear beam no blind zone
3. IP Rate: IP68
4. Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
5. Built-in constant current CPU,instant full brightness without start-up relay
6. High quality Aluminum heat dissipation ensures the secure temperature range
9. Low Power Consumption than Halogen bulb, Energy Saving
10.Low Voltage Protection, High Precision Constant Current driver Chip
11.Shakeproof and Long lasting up to 50,000 Hours.
12. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
13. All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Package Content:
2x 9005 High Power LED HeadLights Bulbs
2x 9006 High Power LED HeadLights Bulbs
LED headlight advantages:
1. LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety. Instantly start without strong current impact, improve battery life by more than 30%.
2. Fast cooling, using the most advanced, heat-dissipating structural design.
3. Low heating temperature, The working temperature of helium can reach 800°-1000°
4. LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
5. Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
