________________________
NOTE _______________________
*** For Vehicles with Sliver Dash*** ________________
__ COMPATIBLE VEHICLES_______________
TOYOTA 2005 - 2008 Tacoma with JBL System
This dash kit fits the Industrys STANDARD sized Double DIN Radios?
ONLY. Off brand and Substandard radios may not fit.?
CHECKthe Manufacturers Specifications of the radio chassis and face size to assure fitment with this kit.
DOUBLE DIN : Chassis Size:?180mm x 100mm (7.086" X 3.937")
Maximum Radio Face Size:?3-13/16" X 6-13/16"?
________________
__ PACKAGE INCLUDES _______________
TOYK972S - Single / Double DIN Stereo Dash Kit (silver)
Factory textured ABS plastic.?
Installs single DIN or single ISO mount radios with pocket or (2) single ISO mount radios.?
Recessed DIN opening (single DIN only).?
Includes double ISO/double DIN trim ring and single ISO trim ring.?
Custom designed mounting brackets, features DIN sleeve support rails and ISO mount capability.?
Includes snap-in "DIN size pocket”.?
Fully illustrated instructions and mounting hardware included.
PAC TATO JBL System Amplifier Turn-On Interface for Select 2003-Up Toyota CAN-BUS Vehicles Retains the use of the factory JBL amplified audio system when the factory radio is replaced with an after market radio Retains the factory functions of balance and fade Simple plug and play connectivity Compatible with the 5.1 and 7.1 Synthesis surround systems Check the General Installation Manual to see basic instructions for the PAC-TATO - NOTES:*** For Vehicles with Sliver Dash***
- DASH KIT: Toyk972S 05-Up Toyota Tacoma Double Din Silver Finish
- This dash kit allows you to replace your vehicle's factory stereo to improve the overall sound quality of your car audio system. It has been designed with high quality automotive grade ABS plastic to match the texture of your factory dash. Installation of this kit is simple. No special tools are required and the included step-by-step instructions will guide you through the install.
- WIRING INTERFACE: PAC TATO . Retains the use of the factory JBL amplified audio system when the factory radio is replaced with an after market radio. Retains the factory functions of balance and fade. Simple plug and play connectivity. Compatible with the 5.1 and 7.1 Synthesis surround systems. Check the General Installation Manual to see basic instructions for the PAC-TATO
- If you have a JBL Amplified system in your Toyota vehicle, then you might just need the PAC TATO. The TATO is designed to retain the use of the factory JBL amplified audio system when the factory radio is replaced with an aftermarket radio.
