CG Cabcool 1201 Deluxe Single 120mm USB Fan Cooling Unit with LED Thermal Control and Monitor - USB Powered

This is a complete finished unit ready to install and quietly cool your cabinet or multimedia center. All you need to power is a standard USB port. This deluxe unit is fitted with a very quiet 1200 RPM fan coupled with our new USB Thermostat Fan Controller. It is programmed for simplicity to turn on at 88 degrees and off at 81 degrees F. Coolerguys Preset Thermostat Fan Controller. The controller comes with a 24" temperature probe that allows for easy placement. Built for mounting on any side of a cabinet where room permits by cutting a hole approximately 3/4" smaller on all sides of the outside bracket. Insert completed cooler assembly in hole and attach to cabinet with appropriate screws. Fans can be set to blow into or out of the cabinet depending on your needs. Cooling Unit includes the following: (1) Coolerguys 120 x 25mm Ultra Quiet Dual Ball Bearing Fan / 5V (1) Black Acrylic Fan bracket (8.25" x 6.25" x .125") (1) Coolerguys USB Preset Thermal Fan Controller(1) Black 120mm fan grills (1) Black 120mm Mesh Grill with Honeycomb 6mm holes (8) Fan Case Screws Black (4) 1/2" black Cabinet screw(s) to attach cabinet. (1) Nylon Multi-Purpose 4" Tie Black (1 pk) Front plate Dimensions: 8.25" x 6.25" (210 x 159mm) Cabinet Cut-out Size: 7.4" x 5.12" (188 x 130mm) (measure and check twice) *Fan Specs: Dimensions: 120x120x25mm Bearing: Dual Ball 1200 RPM Operation Voltage: 3.5V-5.5VDC Input current: 0.30 Amp Max Operation temperature: -10 to +65 C Storage temperature: -40 to +70 C RPM: 1200 +/- 10% CFM: 46 dB: 20