Note:
1. Our LED bulbs only replace halogen bulbs. They cannot replace HID bulbs. Please double-check compatibility before ordering. If you’re unsure whether the item fits your vehicle, please remember to send us a message with your car’s make, model, year, and other relevant details—this will help us confirm compatibility. Thank you!
2. Please note that some vehicles (such as 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Benz, and more) may require a set of CANBUS adapters to be installed. This prevents error messages, turn signal hyper-flashing, or rapid blinking.This is not a problem with the LED bulb and is not covered by the warranty. To confirm if a decoder is needed, simply remove the original headlight bulb and check if the dashboard shows “BULB ERROR.” This listing does not include bulb adapters.
////Specifications:
Plug Type: H11 H8
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Wattage: 80W/Set,40W/Bulb
Luminous Flux: 4000LM/set (2000LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP Chips (USA-manufactured) – Features 2 luminous faces with zero blind spots for all-around visibility.
*Engineered Beam Pattern – Throws more light evenly onto the road at the optimal angle, eliminating fuzzy or scattered illumination.
*Xenon-White Light – Enhances reflection of road markings and signs, revealing clearer road conditions during night drives.
*270° Low Beam Angle – Equipped with a precise cut-off line to prevent glare for oncoming traffic, ensuring safe driving for everyone.
*All-in-One Heat Conduction System – Maintains the bulb at an ideal working temperature for consistent performance.
*Built-in Constant Current CPU – Delivers instant full brightness with no need for a start-up relay—brightness when you need it, instantly.
////Parcel Content:
2x H11 H8 Led Fog Light Bulbs
Installation Caution:
1. As a safety precaution, ensure the vehicle has had sufficient time to cool down completely before starting the installation process.
2. Put the vehicle in park; for manual transmission vehicles, ensure it is securely in gear.
3. Make sure the ignition is turned off and the keys are removed.
Exercise caution to avoid burns, especially when turning the vehicle’s lights on or off.
4. Be careful not to crush or cut the bulbs. Also, do not touch the bulbs with your fingers, as this can cause premature dimming or damage.
5. Thoroughly inspect the connections of contact points, ports, and wires, as faulty connections may cause lighting issues.
Ensure the end of the bulb does not come into contact with the interior components.
////Note:
1. Please check the size of your bulbs on your vehicle before purchasing.
2. Please make sure the headlight housing has enough space for installation before purchasing.
3. Professional installation is highly recommended. If you have any questions, please feel free to contact us.
