Features:
- Brand new high quality
- Made of high quality material, durable
- Built-in imported MOS tube, can carry 550A current
- Integrated design, just connect the battery and use it
- Copper pins are detachable and replaceable
- 99-level stepless adjustment, more convenient to use
- With a trigger button, 1 press welding, very convenient
- Built-in LED indicator
Specification:
- Body size: 25mm*170mm
- Cable length: 350mm
- Wire specification: 12AWG silicone wire
- Power interface: copper ear/EC5 (package optional)
- Using voltage: 12V-16.8V
- Spot welding current: 80A-150A
- Power components: imported 550A MOS tube
- Shell material: high temperature resistant nylon
- Spot welding material: 0.1mm nickel-plated strip
- Solder pin specification: 3MM*1.5MM*40MM professional alumina brazing pin
- Can the copper needle be replaced: Yes
- Welding : 0.1mm nickel-plated steel strip
use:
1. It is recommended to use a 12V 20AH-60AH lead-acid battery with good performance, or a high-rate 3-cell or 4-cell power lithium battery pack, or a car emergency start power supply as the power input. (Must have good performance, at least the level that can start the car, voltage range 12V-16.8V)
2. The interface should be firm, and the wires should not be pulled randomly. Spot welding should start from a small power and increase slowly to avoid excessive current affecting the performance of the MOS tube. Do not reverse the electrodes of the input terminal, and do not use it the specified voltage range
3. The nickel-plated steel strip is recommended to be welded within 0.1mm, and the effect of 0.2mm can also be achieved by superimposing 2 times of welding. Pure nickel or copper aluminum cannot be welded.
Package Included:
1*butt welding pen
1*Roll nickel sheet (width 6mm, 0.1m)
Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.
WARNING: 