9005 H11 High&Low Beam for Chevrolet Sonic 2012 2013 2014 2015 2016 LED Headlights H11 Fog Lights 6pcs

Note:

1. Our LED bulbs only replace halogen or LED bulbs. They cannot replace HID bulbs. Please double-check compatibility before ordering. If you’re unsure whether the item fits your vehicle, please remember to send us a message with your car’s make, model, year, and other relevant details—this will help us confirm compatibility. Thank you!

2. Please note that some vehicles (such as 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Benz, and more) may require a set of CANBUS adapters to be installed. This prevents error messages, turn signal hyper-flashing, or rapid blinking.This is not a problem with the LED bulb and is not covered by the warranty. To confirm if a decoder is needed, simply remove the original headlight bulb and check if the dashboard shows “BULB ERROR.” This listing does not include bulb adapters.

Specifications:

①Headlight:

Model: 9005+H11/H9/H8

- Wattage: 110W/set, 55W per bulb

- Color Temperature: 6000K White

- Lumens: 20000LM/Pair

- Voltage: DC 9-32V ( Fit 12V,24V Vehicle )

- Light Source Model: COB Chip

- Waterproof Rate: IP68

- Fan Speed: 12,000RPM (headlights only)

- Beam Angle: 360°

- Material: Aviation 6063 aluminum profile

- Operating Life: >50000hrs

②Foglight:

- Socket: H11 H9 H8

- LED Type: LED chip high power

- Application: Fog Driving Lights / Daytime Running Light DRL

- Beam Type: 360°Beam Angle

- Color Temperature: 6000K Super White

- Lumens: 3200LM/Bulb , 6400LM/Pair

- Working Voltage: DC 12V to 24V

- Power: 80W/Set,40W/Bulb

Package Included:

2x 9005 LED Headlight Bulbs

2x H11 LED Headlight Bulbs

2x H11 LED Foglight Bulbs

////Note:

1. Please check the size of your vehicle’s bulbs before purchasing.

2. Please make sure the headlight housing has enough space for the installation before purchasing.

3. Professional installation is highly recommended; if you have any questions, please feel free to contact us.

Install Caution:

*As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

*Put the vehicle into park or make sure it is securely in gear.

*Be sure to turn off the ignition and remove the key.

*Be careful to avoid burns, especially when turning on or off the vehicle's lighting.

*Be careful to avoid crushing or cutting the bulbs. Also make sure not to touch the bulbs with your fingers, as this will cause overheating or discoloration.

*Thoroughly examine the connections of the contact points, ports and wires as faulty connections can cause lighting problems.

*Make certain that the end of the bulb does not come into contact with the interior light shield of the headlight when adjusting the bulb.