RiverRidge Medford 2-Door Bathroom Medicine Cabinet Wall Storage with Towel Bar - White

This cabinet looked small in the marketing photo but it actually is larger than I expected, even though I knew the measurements. And that is ok, it fits in the area where I need it so it's not overly large, it's just right and should provide all the storage space I need. It's a very simple design, very basic. I plan to dress it up a little with some crystal knobs with an ornate and shiny silver backplate. It was very easy to assemble, didn't take very long. Just don't get ahead of yourself looking at the diagram instructions. Remember to insert the towel rod between the two side pieces simultaneously before you fasten all the bolts holding the entire unit together. Same with the cabinet door hinge pins, insert them into the top and bottom shelves before tightening the bolts to hold everything together. My only concern is that the back of the cabinet is mostly 1/8 inch thin, somewhat flexible almost "cardboard" material. A little flimsy. Everything else about this unit is pressed particle board. At the top of the back is one board about 2 inches high and a half inch or so thick with 2 holes in it for bolting it onto your wall. And that's the only wall-fastening available and I'm concerned it won't hold the weight of the cabinet especially once it is full of stuff. I'm considering I might want to replace the two screws and drywall anchors provided with something a little stronger.