SABRENT USB 3.1 to SATA Dual Bay Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD. Hard Drive Duplicator/Cloner Function [Includes Both Type C and Type A Cables, Supports 10TB+ Drives] (DS-UTC2)

The SABRENT DS-UTC2 SATA Docking Station supports the direct insertion of Desktop two 2.5"/3.5" SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.1 to quickly transfer files up to 10 Gbps! Connect any 2.5"/3.5" Serial ATA (SATA) or SATA II Hard Drive to your computer through an available USB 3.1 port on your desktop or laptop.

Hard Drive Duplicator Function
The Sabrent DS-UTC2 Standalone Duplicator Dock can be used to duplicate/clone an existing hard drive without connecting to a computer, or simply as external storage to transfer data between a hard drive and your computer.
Note: Your Source Disk must have equal or less Capacity when compared to your Target Disk

To use Hard Drive Duplicator Function:

1. Insert Both hard drives and identify Source Disk and Target Disk
HDD1=Source Disk; HDD2=Target Disk
2. Make sure that the USB cable is disconnected from any computer
3. Connect power supply and switch on power.
4 Press the CLONE button 2 times.
5. A Blue LED will flash on 25% indicating that the cloning process has begun
6. The cloning process is complete when ALL the lights turn solid Blue (25%-100%)
7. Finally press the power switch to the OFF position and eject your drives

Note: The cloning process can take a couple minutes or up to 4 hours depending on the Files/Disks that are being cloned

System requirements:
Available USB 3.1 for high speed data transfer
Reverse compatible with USB 3.0 & USB 2.0 & USB 1.1.
Windows: 7/8/8.1/10 (Both 32-bit & 64-bit versions)
MAC: OS X

Package Contents:
Sabrent DS-UTC2 Hard Drive Dock
Power Supply
USB type-C cable
USB type-A cable
User Manual