HANGKAI 12HP 2Stroke Heavy Duty Outboard Motor Boat Engine 169CC Water Cooling CDI System

Description

This outboard motor is made of high-quality aluminium material, which is the best choice for you to enjoy your cruise. All you need to do is install it in the stern of your boat, and you can enjoy a fast and easy-to-operate water journey!

Application

This outboard motor applies to small ships within 19.69ft length and 661lbs weight, such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc.

Specifications

Color: Black

Material: Aluminium

Displacement: 246CC

Cylinder: 2

Horsepower: 12HP

Cooling System: Water-cooling

Ignition System: CDI

Control System: Tiller Control

Starting System: Manual Start

Trim and Tilt System: Manual Tilt

Gasoline Type: #92 Gasoline

Mixing Ratio: Fuel:Oil=50:1

Recommended Lubricant: 2 Stroke Lubricating Oil

Speed (r/min): 4500-5500

Driving Speed: 20-25km/h

Gear Positions: F-N-R

Gear Ratio: 2.08(27:13)

Number of Propeller Blades: 3

Suitable Number: 2-3 People

Suitable Tailboard Height: 38-44cm/ 14.96-17.32in

Suitable Tailboard Thickness: 25-45cm/ 9.84-17.72in

Length of Vessel Used: ＜ 6m/ 19.69ft

Weight of Vessel Used: ＜300kg/ 661lbs

Thrust: 250kg/ 551lbs

Bore*Stroke: 50*43mm/ 19.69*16.93in

Recommended Propeller Range: 3-8.9"x8.5"

Standard Fuel Tank Capacity (External Oil Tank): 24L/ 6.34Gal

Product Size: 79.3*32*99.6cm/ 31.22*12.60*39.21in

Package Size: 108*68*41cm/ 42.5*26.77*16.14in

Net Weight: 26kg/ 57.32lbs

Gross Weight: 33kg/ 72.75lbs

Package Included

1* Outboard Motor

1* Flameout Rope

1* Oil Pipe

1* 24L Fuel Tank

1* Split Pin

1* Spark Plug

1* Water Pump Impeller

1* Starting Rope

1* Paper Pad

1* English Instruction Manual

All Needed Accessories

Notes

Please note that this product must be started in water, and it is not allowed to start the engine on shore.

Please note that the two-stroke outboard engine must use a mixture of 92 #gasoline and two-stroke engine oil. In addition, gasoline and oil must be premixed and stirred evenly before being poured into the tank.

Please note that the running-in period is about 10 hours or one month. During the running-in period, do not drive with a high throttle.

The volume ratio of gasoline to oil during the running-in period of the new engine is 25:1. After the running-in period, the volume ratio of gasoline to oil is 50:1.

Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about 6 months;

When the outboard motor is started, loosen the exhaust screw on the fuel tank cover counterclockwise. The emergency flame out rope shall be inserted, and the other end shall be placed on the wrist or belt.

When the motor has no water outlet, please stop using it immediately, and then check the water pump impeller or check whether the water outlet is blocked.

To avoid scratching the cylinder, please do not do the following: start the motor in the water；use the motor when it stops cycling water.

Manufactures Statement of Origin (MSO): Available upon request. Please contact seller directly

Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.