EZ-20502 EZ Weld Pvc Cement Regular Body, Clear 8oz

E-Z Weld Clear is a regular bodied, fast-set, PVC Solvent Cement. This is the most commonly used product of the solvent cement family. It is formulated to provide cost-effective cement for joining PVC pipes and fittings up to 4” diameter interference fit. Application: Clear, Regular Body PVC / uPVC cement for use on up to 4“ (110mm) diameter for Schedule 40. Formulated for plumbing, electrical conduit, pool & spa. For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly-like. Always follow instructions on the label. Application temperature: 32°F to 110°F (0°C to 43°C).Storage temperature: 45°F to 110°F (7°C to 43°C).ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) e.g. a 2” pipe size joint made at 55°F, 50% Relative Humidity, and a test pressure of 100 psi would require a cure time of 4 hrs. Certification: This product is tested, certified, and approved by NSF International for use on the drain, waste, and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials(IAPMO)