Key Features:
➤Brake Fluid Tester with Printer: Compared with the common brake fluid test pen on the market, this latest generation digital brake fluid tester and supports on-site printing of test reports, which can display all test data, prompt information, set date, VIN number and other information. This greatly facilitates car service technicians presenting brake fluid conditions to car owners.
➤Support DOT3/DOT4/DOT5.1 Brake Fluid Detection: The automotive brake fluid moisture detector is easy to operate and support detecting three conventional brake fluids: DOT3/DOT4/DOT5.1. The upgraded version of the brake oil moisture checker can quickly detect the water content of automobile brake fluid (brake oil), and checks whether it is qualified, and if necessary will reminds you to replace the brake fluid.
➤Highly Sensitive Probe: Brake oil tester is equipped with a 240mm long stainless steel gooseneck probe and high-precision sensor. The probe is covered with chromed surface, which is resistant to oils and oxidation, gooseneck probe is very flexible which can be bent at will, able to quickly and accurately detect the quality of brake fluid.
➤Ultra-clear Large Screen: The brake oil water content analyzer is equipped with a high-definition screen, which can intuitively and clearly display the state of brake fluid, allowing you to view the test results at a glance. It also supports screen backlight, so it can work easily in the sunlight or at night.
➤Sound & Light Dual Alarm: Brake fluid oil quality moisture analyzer has an alarm function, when the water content of the brake fluid reaches 2.5%, an exclamation mark will be displayed on the screen to remind you to change the brake fluid. When the water content reaches 3.0%, the screen will turn red and the brake fluid tester will emit a "beep-"alarm to remind you to change the brake fluid immediately to ensure safety.
How to Operation:
Step 1: Connect red and black clamps to positive and negative terminals of automotive battery respectively to power on tester.
Step 2: Press left button and right button to select tested brake fluid type, then press confirm button to confirm.
Step 3: Immerse test probe into brake fluid and press confirm button to test.
Step 4: Test result will be seen in LCD display. Different result refers to different display.
Step 5: Press confirm button to enter printing interface. Date and VIN number ( last 4 digits ) setting are available. Press left button or right button for numeral decreasing or increasing. Pressing confirm button is required after every digit confirmed and let cursor move to nest position, and so on. After all set, press confirm button to print out test result.
Note: Up button is available to return to previous display interface when below situation encounters. 1. Select wrong type of brake fluid and need to reset it. 2. Retesting is required prior to printing out test report.
WARNING: 