In this busy city, waiting room chair becomes a unique enjoyment. We no longer pursue speed and efficiency but experience the wonderful and delicate waiting. These chairs are not just ordinary chairs, but more like a companion in the waiting process. With its company, time seems to have slowed down, and we can better enjoy the waiting time.
Application
This product can be used for commercial or home use, such as in airports, subways, clinics, living rooms, homes, lobbies, hospitals, barber stores, beauty salons, stations, and offices.
Model: md002
Material: Steel Plate, Aluminum Alloy, Cold Rolled Steel Plate, Steel Pipe, Rubber
Process: Rust Removal, Polishing, Pickling, Electroplating, Electrostatic Spraying
Style: Classic
Room Type: Office
Special Feature: Arm Rest
Assembly Required: Yes
Backrest Tilt Angle: 120°
6 Seat Specification
Color:Black/Blue/Silver
Each Seat Load: 300kg/661.39lbs
Overall Load Capacity: 1800kg
Seat Plate Thickness: 1.5mm/0.06in
Beam Thickness: 2mm/0.08in
Product Size: 176*55*75 cm/ 69.3*21.5*29.5 in
Single Seat Width: 50cm/19.7in
Seat + Armrests:
Gross Weight: 34kg
Net Weight: 32kg
Beam:
Gross Weight:8 kg
Net Weight: 7kg
Package Included
2 * 3-Seat Waiting Room Chairs
All Accessories for Installation
Key Features
High Load Capacity: The cold-rolled steel seat plate with a thickness of 1.5mm and the steel tube beam with a thickness of 2mm make it more stable and have an excellent load capacity of 1984.16 lbs, so you can provide a safe and secure reception for your guests.
Three Seats: Three wide seats (3*19.7 inches) can provide more than enough resting space for your guests.
Good Customer Service: Communication is the best way to solve problems. If you encounter any problem after purchase, please contact us in time before opening or unpacking the box. We will do our best to solve the problem for you.
Details
One-piece Mesh Panel: The mesh panel backrest has good breathability, and the one-piece design makes it have a stronger leaning weight-bearing capacity.
Anti-slip Rubber Feet: Anti-slip rubber feet not only enhance the stability of the product but also effectively prevent the ground from wear and tear.
How to Install
1. According to the shape of the chair, use 8 * 8 screws to screw the black crescent dependence in the nuts on the seat plate.
2. Screw the beam with 8 * 15 screws in the nuts of the crescent support.
3. Put the armrests on the legs of the crossbeam, put two 8*100 screws through the bottom, and screw them into the nuts inside the armrests.
4. The chair has been installed into shape, put the booster bar on the wrench, tighten all the screws, and install the bottom legs, and installation is complete.
Notes
In order to protect the seat and armrests from damage during transportation, and the size of the beam is too large, we send the beam separately. Please wait patiently for all parts to arrive.
Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.