Window Privacy Film, Frosted Removable Glass Covering for Bathroom, Opaque Static Cling Heat Control Door Sticker for Home Office Living Room, Non-Adhesive Matte
✔ EXCELLENT PRIVACY PROTECTION: With Top Privacy Level: ★★★★☆, not recommend for bathroom, the window film blocks unwanted views from outside and no one can see in, ensuring that your private space is well protected while still allowing comfortable natural light in.
✔ GLARE CONTROL & UV REJECTION: One sheet of window film resolves multiple problems in hot summers days - No more strong dazzling glares and harmful UV rays, the window film helps filter most of sunlight and reflect 84% UVA rays and 99% UVB rays.
✔ NO MORE GLUE HASSLE: Say goodbye to sticky toxic chemical glue - the window film is super static cling and can be applied in minutes once the protective backing film removed and enough water used; Enjoy the fun of DIY!
✔ ECONOMICAL & EASY APPLICATION: No more heavy troublesome curtains or blinds, the high quality window privacy film helps decorate your space at a minimum cost, you can easily apply it on windows at your home, kitchen, bedroom, bathroom and more, instantly making your windows look high end.
✔ Special 3D design & Magical rainbow effect：The window sticker itself doesn’t have actual colors，but when the sun shines through, it casts lots of rainbows with special 3D design.Outstanding performance in adding interior adornments.
Brighten your home with Decorative Window Film
Partial privacy protection blurs unwanted views, simple frosting texture decorates your personal space, static cling to the surface without glue, simple peel-and-stick installation, easy to cut and trim, easy to remove and re-apply for multiple times.
Size : 17.7''*39.37''/ 17.7''*78.74''/ 17.7''*118.11''/ 17.7''*157.48''
23.62''*39.37''/ 23.62''*78.74''/ 23.62''*118.11''
Give privacy and allow natural light in
Deck out interior windows
Effective UV protection
Super easy to install
Completely maintenance-free
Removable, reusable, affordable
EASY APPLICATION: Step 1-Step 2
STEP1:Clean the window thoroughly and make sure the surface is clean enough without any dust.
STEP2:Measure the surface and cut the film. Leave an extra inch margin each side for an easy adjustment.
Why the window film fall off?
1. The plastic liner of the film isn’t peeled off.
2. You didn’t trim the edges or leave a 1/16” wide gap around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass and allows you to completely squeegee the water and air from under the film.
3. The blade or the knife for cutting the film is not sharp, resulting in deformation at the edge of the film.
Important Tips:
See detailed instruction in packaged manual.
Please affix tapes on both sides to separate the backing, or wet the film corner and rub it for a while, then you will see the thin backing.
Use a hair dryer to Soften the film or Soak the film in warm water under cold weather when installing.(heat resistance is under 80℃）
The window film works only on Flat, Clean, and Smooth surfaces. It may not fit neither uneven/broken surfaces nor plastic surfaces.
