Car Shampoo is a neutral pH ultra-foaming car shampoo that will instantly clean away dirt and debris without stripping any sealant or wax. Unique surfactants to help keep the surface lubricated and will cling to the surface longer without running off the vehicle like most car shampoos.
Car Shampoo can be used with a foam canon, two bucket wash method or the touchless wash method. Safe on any exterior automobile surface, in the shade or direct sunlight. The unique formula with quickly clean the surface of any road film while maintaining any protective layer that was applied to your vehicle.
Car Shampoo can be used sparingly to provide the highest amount of suds possible with or without a foam canon. When combined in a foam canon, our shampoo can help decrease the chances of scratching or marring your vehicle during the wash process.
How To Use
Always start with a clean bucket that never had contact with silicone. Silicone could have been present on a wheel and tire brush and then placed into that wash bucket. Even if the bucket was cleaned, silicone could still be present and entirely "flatten: the sudsing capabilities of any shampoo solution.
Car Shampoo can be diluted up to 256:1 and still remain a very effective shampoo solution. After adding approximately one or two ounces of solution per one gallon of water, fill desired wash bucket up with high pressure water to desired level.
After you apply and wash entire surface area, rinse surface area from top to bottom.Wash and Shine is an excellent product to use after this step for added gloss, protection and ease of drying.Dry vehicle with microfiber drying towel or soft chamois.
Tech Tip
If you are completing the washing stage in the direct sun, you can always wash and prep each side that is covered by some shade. Simply follow the above instructions, but start your prep work on the shady side first. Once your washing, clay treatment, tar removal and other preparation is complete, turn the vehicle around and start the process again on the other side. This will give you the extra time needed to proceed through all the appropriate steps while preventing any solutions from drying too quickly.
After the sides of the vehicle are complete, you can proceed to wash and prepare the other flat and vertical surfaces of the vehicle.If you are using Greenway's Bugs B Gone, break up the front end into sections to avoid having the product dry on the vehicle surface.The bug removal stage should be done separately and the product should be completely rinsed before washing or prepping any other surface of the vehicle.
Most detailers simply use too much wash solution.Professional, concentrated shampoos such as Car Shampoo, does not require a large amount of solution to be effective.
