TekSupply 108663 TekCoil K x MPT Compression Fitting 0.50 in x 0.50 in - ASTM F1281-2005 Standard

TekCoil K Compression Fittings are made of brass and incorporate a rubber gasket system. The K Connection - Remove the nut and split ring from the fitting. Push the nut and split ring onto the pipe. Bevel the inside of the pipe by inserting the TekCoil reaming tool and rotating it 360 deg. The fitting will then slip easily into the pipe. Push the fitting fully home in the pipe. Turn the nut finger tight, plus one full turn with a wrench.