TAPE POLYKEN REPAIR

Polyken/Nashua 361-11 Waterproofing Repair Tape is a tape with an aluminum foil backing/carrier which is coated on one side with a permanent butyl rubber adhesive. The tape forms a permanent seal with excellent adhesion to all surfaces. Nashua 361-11 is also extremely conformable and resistant to cold, heat, water, and sunlight. Its silver foil backing is paintable which helps match surfaces. Typically used for indoor and outdoor sealing and repair of gutters, roof alleys, eaves, hips, and ridges. Nashua 361-11 Waterproofing Repair Tape can also repair seams and seal leaks, rips, and tears in pipes, hoses and in metal panels of trailers, shipping containers, and metal buildings.

The tape is labeled as Polyken/Nashua 361-11 in the product description because they are co-brands owned by Berry Plastics (the parent company of Nashua, Polyken, Ludlow, Patco, etc. tape brands). The core of Polyken/Nashua 361-11 Waterproofing Repair Tape can be labeled as either Polyken or Nashua depending on which cut rolls are received from the manufacturing production run. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 10m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: aluminum foil
- Adhesive: butyl rubber
- Release Liner: LDPE (low-density polyethylene) blue film
- Standards Met: UL723
- Thickness: 11 mils (carrier, adhesive) 9 mils (adhesive) 2 mils (carrier)
- Adhesion: 75 ounces per inch (to stainless steel test panel)
- Tensile Strength: 20 pounds per inch (longitudinal)
- Service/Operating Temperature: 40F to 200F