18in Floor Scrubber Buffer Polisher Commercial Industrial Floor Scrubber Machine 1.5HP
Key item features
- 110V 1.5HP 1100W pure copper motor runs at 154 RPM, 18-inch base disc delivers wide cleaning coverage; low noise ≤54dB and stable operation.
- Equipped with water tank, carpet brush, floor brush and pin terminal, supports floor washing, waxing, polishing and carpet deep cleaning.
- Aluminum-steel body is acid & alkali resistant and impact-proof; adjustable handle angle for comfortable operation.
- The edge of the nose is designed with anti-collision buffer rubber ring, reducing the adverse impact of collision on the machine, more safe; The machine head carries on the counterweight, the pressure is big, can play the good deep cleaning, the polishing effect.
- 12m long power cord for wide range use; suitable for marble, wood, epoxy floors and various carpets, ideal for hotels and public venues.
Specs
- BrandBanfluxion
- Dimensions23.00 x 17.70 x 47.20 in
- Cord length39.37 ft
- Weight110 lb
- Volts110 V
- Has nrtl listing certificationN
- Free shipping
Free 30-day returns
How do you want your item?
About this item
Product details
Product Overview:
This machine features in easy operation, safe use and high cleaning efficiency, suitable to hotel, office building, exhibition halls and other public place for cleaning of the carpets and floors as well as low-speed polishing of various grounds. With a high cleaning efficiency, it can save much time for cleaning. Thus, it is an important device indispensable for current machinery cleaning works.
Product Parameters:
Voltage: 110V/60Hz
Power: 1.5HP(1100W)
Speed of rotation: 154rpm/min
Noise: ≦54dB
Length of power cable: 12m (39.37 ft)
Diameter of Base Disc: 18" (45.72 cm)
Non-loading: A positive and negative difference of 7%
Safety Performance: Type I
Internal / external materials: Aluminum-steel structures
Corrosion resistant: Resistant to acid and alkali corrosion
Degree of anti-striking: Slight striking resistant
Affixed accessories of the machine body: Carpet brush, floor brush, pin terminal and water tank
Main Functions: Washing the floor and carpet, wax cleaning
and low-speed polishing
Net weight: 110lbs (50kg)
Operating Methods and Notes:
1. After opening the tank, please install the machine body, operating handle and water tank well according to the figure as well as the cleaning brush.
2. Check whether the power socket on site meets relative standards. Excessive or insufficient voltage may lead the machine to abnormal operating, overheating or burning down.
3. Add proper solution with cleaning agent to the water tank for cleaning requirements
4. Adjust the operating handle to an angle accustomed by the operator
5. One must clench the operating handle with his hands and no other personnel are allowed to stand around accessories of the machine before starting so as to avoid that they are injured for swing of the machine as the handle is not
clenched. Push the fused switch to the center of the handle, then press the main switch and the brushing machine begins to rotate for cleaning.
6. Loose the main switch handle and the machine will stop working.
7. After finish cleaning, the operating handle should be adjusted to a vertical position and the machine should be dried with a clean cloth so as to extend the machine's service life.
8. It is forbidden to use the brushing machine as other cleaning equipments, excluding the standard counterweight iron, and no additional weight is allowed to add on the machine, or the machine is operated with the operator sitting on it. Otherwise, it is easy to make the operator injured and increase loads on the machine. If it gets serious, the motor may be burned or the gears of the reducer may be damaged.
9. To avoid electric leakage and burn of the motor, never operate in rain.
Item Included (057309):
110V 18" Commercial and Industrial Floor Scrubber Buffer Heavy Duty Polisher Machine *1
- 110V 1.5HP 1100W pure copper motor runs at 154 RPM, 18-inch base disc delivers wide cleaning coverage; low noise ≤54dB and stable operation.
- Equipped with water tank, carpet brush, floor brush and pin terminal, supports floor washing, waxing, polishing and carpet deep cleaning.
- Aluminum-steel body is acid & alkali resistant and impact-proof; adjustable handle angle for comfortable operation.
- The edge of the nose is designed with anti-collision buffer rubber ring, reducing the adverse impact of collision on the machine, more safe; The machine head carries on the counterweight, the pressure is big, can play the good deep cleaning, the polishing effect.
- 12m long power cord for wide range use; suitable for marble, wood, epoxy floors and various carpets, ideal for hotels and public venues.
Specifications
Brand
Dimensions
Cord length
Weight
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
