Kentek USB 3.0 Gigabit Ethernet Adapter Type A Male To 10/100/1000 Mbps CAT5/CAT-5E/CAT6 RJ45 Female M/F LAN Network Internet Converter for PC Windows Mac System

This USB 3.0 Type A connector to gigabit Ethernet Adapter converter is a high performance and low cost solution to your ethernet connection needs. This adapter enables an Ethernet network connection capability for desktops, notebook PC's with standard USB 3.0 (backward compatible with USB 2.0 / 1.1) port. This resolves the issue on the computer or laptop without Ethernet port so you can connect a computer to Ethernet through USB 3.0 easily. The adapter is complaint with USB 3.0 (5 Gbps) to ensure the network speed upto 10/100/1000 Mbps without any compromise. Specification includes Support plug and play, Ethernet Data Transfer:10Mbps (Half/Full Duplex), 100Mbps (Half/Full Duplex), 1000Mbps (Full Duplex), integrates on-chip USB 3.0 PHY and controller compliant to USB Spec 3.0, 2.0 and 1.1. Supports all USB 3.0 power saving modes (U0, U1, U2, and U3), USB Super/High/Full Speed modes with Bus-power or Self-power device auto-detect capability, IEEE 802.3az (Energy Efficient Ethernet), parallel detection and automatic polarity correction, IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading, TCP Large Send Offload V1, full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control, IEEE 802.1P Layer 2 Priority Encoding and Decoding, Jumbo frame, PHY loop-back diagnostic capability, Wake-on-LAN Function, suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin. Support windows 10, windows 8, windows 7, windows vista, Apple 10.6 and Apple 10.8. or above. Come with user manual and CD driver. (most compatible system have built-in driver) *Note: Device not connected to USB 3.0 port may produce slower network speed. Standards: UL, CSA, ISO 9001:2000 manufacturer.