2025 Supply: Morton Clean and Protect Water Softener Salt Pellets, 40 lb

Product Composition and Performance:

• High-Purity Salt: Made from high-purity salt to ensure optimal performance in your water softener.
• Optimized Pellet Size and Shape: Designed for consistent dissolving and efficient brine production within the water softener.
• Reduces Resin Fouling: Helps prevent the buildup of contaminants on the resin beads in your water softener, maintaining their effectiveness.
• Works with Most Water Softener Models: Compatible with a wide range of water softener makes and models. Check your water softener's manual to be sure.
• Laboratory Tested: Undergoes rigorous testing to ensure quality, purity, and performance.

Packaging and Usage:

• Durable Bag Material: The 40 lb. bag is constructed from strong material to resist tearing and moisture.
• Clear Usage Instructions: The bag likely features clear and easy-to-understand instructions on how much salt to add and how often.
• Storage Recommendations: May include information on how to properly store the salt to maintain its quality (e.g., in a cool, dry place).

Value and Brand Reputation:

• Long-Standing Brand Expertise: Morton has over 170 years of experience in the salt industry, signifying a deep understanding of salt and its applications.
• Commitment to Quality: Morton is known for its commitment to producing high-quality salt products.
• Potential Warranty or Guarantee: While not always explicitly stated on the packaging, the product might be backed by a manufacturer's warranty or satisfaction guarantee.
• Made in the USA (Potentially): If applicable, stating that the product is made in the USA could be a selling point for some customers.

Okay, here's a step-by-step guide on how to use Morton Clean and Protect Water Softener Salt Pellets, written in bullet points:

How to Use Morton Clean and Protect Water Softener Salt Pellets:

1. Check Your Water Softener's Manual: Before you begin, consult the owner's manual for your specific water softener model. It will provide instructions tailored to your appliance.
2. Turn Off the Water Softener (Optional but Recommended): Some manuals recommend turning off the water softener's bypass valve during refilling to prevent any issues. It is usually located near the softener tank.
3. Locate the Brine Tank: The brine tank is the large container that holds the salt. It's usually separate from the taller, skinnier resin tank.
4. Open the Brine Tank Lid: The lid may lift off or unscrew, depending on your model.
5. Check the Salt Level: Look inside the brine tank. The salt level should ideally be at least half full. If it is less than 1/2 full it is time to add salt.
6. Add Morton Clean and Protect Pellets:
   • Carefully pour the pellets from the bag into the brine tank. The 40lb bag has an easy-tear opening to make pouring easier.
   • Fill the tank to about two-thirds full. Do not overfill.
   • Recommended Dosage: Morton generally recommends adding two 40 lb. bags every two months for an average household. Adjust this based on your water hardness and household water usage.
7. Break Up Salt Bridges (If Necessary): If you see a hard crust or "bridge" of salt on top, carefully break it up with a broom handle or similar tool. Be gentle to avoid damaging the tank.
8. Close the Brine Tank Lid: Securely replace the lid.
9. Turn the Water Softener Back On (If Turned Off): If you turned off the bypass valve earlier, turn it back to the "on" position.
10. Monitor Salt Levels Regularly: Make it a habit to check the salt level in your brine tank monthly and refill as needed. This helps ensure your water softener operates efficiently. You can set a reminder on your phone.
11. Regeneration: You may want to manually regenerate your water softener after adding salt. See instructions on your specific water softener on how to do this.