

Water Pressure Booster Pump 115V 120W Automatic Household Water Pressure Booster Pump Pressure Pump For Duplex Apartments, Suburban Villas, Kitchens (Outlet Diameter 3/4")
Key item features
- Excellent Performance: The 120W powerful copper core motor provides this product 21.7PSI maximum pressure, 396GPH flow rate, and 49.2ft head, which will bring you a strong and stable water pressure and allow you to have a comfortable shower.
- Thoughtful Design: Designed with a water flow switch, it can automatically adjust to your needs, increase the pressure of the household water tank, and keep a steady pressure.
- Low Noise: It will operate at a noise level of about 30-50db, which is equivalent to the sound of a normal conversation, and will not affect the normal life of your family and neighbors.
- Safety Protection: The water and electricity isolation design, ground protection, leakage protection, water shortage protection, overheating protection, anti-idling, and overload protection greatly improve the safety of use.
- Quick Heat Dissipation: The powerful cooling fan and multiple heat dissipation holes can accelerate the efficiency of heat dissipation to protect the motor from overheating and extend the service life of this product.
Specs
- Power typeCorded Electric
- BrandAUTRINIX
- FeaturesDurable
- Volts110 V
- Weight7.5 lb
- Has nrtl listing certificationN
- Free shipping
Free 30-day returns
(Only one option can be selected at a time)
How do you want your item?
About this item
Product details
Application
It applies to duplex apartments, suburban villas, high-rise buildings with low water pressure, kitchens, bathrooms, water heaters pressurized, household water pressurized, and solar water heaters pressurized. It is suitable for water heater pipe pressurization with insufficient water pressure to prevent the water supply from being cold.
How to Install:
1. Wrap sealing tape(not included) around the inlet, add a gasket, and screw on the adapter.
2. Wrap sealing tape(not included) around the outlet, add a gasket, and screw on the water flow switch.
3. Connect the water inlet to the water pipe(not included).
4. Connect the water outlet to the water heater water pipe(not included).
5. After fixing the pump, make sure it is installed correctly, then turn on the power and use it.
Specifications
Color: Green
Model: 15GR-15
Process: Bake Paint
Assembly Required: Yes
Plug Type: US Standard
Motor Type: Copper Core Motor
Material: Copper, Aluminum, Iron, Plastic
Protection Level: IP45
Current: 1.1A
Power: 120W
Voltage: 115V
Frequency: 60Hz
Rotate: 3460r/min
Capacitance: 15μF
Max Head: 15m/49.2ft
Max Flow: 25L/min/396GPH
Max. Water Pressure: 1.5bar/21.7PSI
Insulation: B
Noise: 30-50dB
Max. Water Temperature Range: 80-100℃/176-212℉
Power Cord Length: 1m/3.28ft
Product Height: 19.5cm/7.68inch
Pump Body Diameter: 7.5cm/2.95inch
Total Length: 18.5cm/7.28inch
Connection Size: G1/2"
Outlet Diameter: 3/4"
Packaging Size: 24*20*12cm/9.45*7.87*4.72inch
Gross Weight: 3.7kg/8.16lbs
Net Weight: 3.4kg/7.5lbs
Package Included
1*Water Pressure Booster Pump
1*Water Flow Switch
1*English Manual
Other Needed Accessories
Notes
1. Water pipes are not included in this package. Before purchasing, please check the water pressure at home. If the water pressure at home is greater than the booster pump, the boosting effect will not be achieved.
2. When the pump leaves the factory, a small amount of water may remain in the pump. This is due to strict tests on the pump to ensure quality and meet the testing standards. This does not mean that the pump has been used.
3. Please strictly follow the instructions for installation and use, and pay attention to electrical installation specifications. Before use, please carefully check the cables, power supply, etc., and take protective measures to avoid safety hazards. We suggest that professionals install this product.
4. It is forbidden to install it upside down to prevent water from leaking into the motor, which may cause a short circuit and burn the motor.
5. When installing the water flow switch, place the cover face of the water flow switch facing upwards and make sure to tighten the movable joint next to the water flow switch. Once the water flow switch is turned, the internal screws may become loose due to compression, causing water leakage. Therefore, be sure to tighten the water flow switch! But please do not tighten the live connector too much to prevent the gasket inside from being broken and the screws on the side of the water flow switch from being broken.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
- Excellent Performance: The 120W powerful copper core motor provides this product 21.7PSI maximum pressure, 396GPH flow rate, and 49.2ft head, which will bring you a strong and stable water pressure and allow you to have a comfortable shower.
- Thoughtful Design: Designed with a water flow switch, it can automatically adjust to your needs, increase the pressure of the household water tank, and keep a steady pressure.
- Low Noise: It will operate at a noise level of about 30-50db, which is equivalent to the sound of a normal conversation, and will not affect the normal life of your family and neighbors.
- Safety Protection: The water and electricity isolation design, ground protection, leakage protection, water shortage protection, overheating protection, anti-idling, and overload protection greatly improve the safety of use.
- Quick Heat Dissipation: The powerful cooling fan and multiple heat dissipation holes can accelerate the efficiency of heat dissipation to protect the motor from overheating and extend the service life of this product.
Specifications
Plumbing pump type
Power type
Brand
Features
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
