HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit & Bleed Kit for Seastar

1. Bleed Kit: Compatible with Seastar hydraulic steering systems. Used for refilling your boat's steering system fluid.
2. Front Mount Steering Cylinder Seal Kit: Work for SeaStar Pivot/Front Mount Cylinders; 
Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, 
HC6751, HC6752, HC6753, HC6754, HC6755.
3. MATERIAL: High quality brass fitting and PVC tube, Aluminum, steel and rubber ensure excellent mechanical and physical properties. Sunluway product shows its good anti-
oxidation, corrosion resistance and durability.
4. PACKAGE INCLUDE: Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings. HS5157 
kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Wrench, 8 x varies O-rings
Product Description:
This Front Mount Hydraulic Steering Cylinder Seal Kit is great for use in marine applications.
It is critical for you to check the cylinder rod to see whether it has scratches, nicks or damages in anyway. Any damages found, the complete cylinder must be replaced. Failure to 
replace a damaged steering cylinder will result in seal failure and possible loss of steering. Do not remove shaft from steering cylinder. Bleeding the system to remove any air, replace 
with Seastar Hydraulic Oil HA5340 only. Check for smooth operations and full travel of the cylinder. Check for no leaking.
Compatibility:
Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, 
HC6752, HC6753, HC6754, HC6755
Model Reference:
Seal Kit for HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact 
Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)).
Bleed Kit is necessary to fill your hydraulic steering system!
When you are 100 miles offshore and your steering goes out, you will be glad to have this to refill your hydraulic system.
Compatibility:
Compatible with Seastar hydraulic steering systems
Advantages:
Entire steering system remains sealed during the bleed process from end to end -- Changing out fluid bottles is quick and clean!
Note:
Simple yet effective bleed system for Seastar hydraulic steering systems. Standard Seastar helm to bottle fitting - do not pierce bottle (PN: HA5430H). Custom bridge tube connects 
bleed ports on steering cylinder.
Basic Instructions:
1. Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty)
2. Connect bridge tube to bleed fittings on steering cylinder and loosen fittings
3. Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm
4. Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed
5. Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder
6. Repeat 3-4 as necessary until no air is visible in bridge tube
7. Tighten bleed fittings before removing bridge tube
Package Including:
2 x Seal Glands
1 x Pin Wrench
1 x Seal Gland Assembly Guide Tool
1 x Seastar Bottle to Helm Tube
1 x Bridge Tube that connects to Seastar Bleed fittings