Indoor Security Camera, Wifi Camera for Home Surveillance with 64Gb Sd Card, 360° Smart Camera with Night Vision, 2-Way Audio, 2.4Ghz Wifi, Motion Detection, Works with Phone App, Easy Setup

Wifi Camera Night Vision Wifi Remote Wireless Video Camcorders Camera With 64G Card

Feature:

The internal microphone supports two-way audio

Supports cards up to 128

Supports .4G HZ Wifi (Don't support 5G HZ WiFi)

Supports mobile video surveillance (iOS, Android)

Two-way audio: Real intercom, built-in microphone and speaker, instantly show the wonderful moments in your life Video playback: Support mobile client video playback, view the information you want at any

Product parameters:

Product Name: 30w WiFi webcam

Cpu:xr872at

Number of cores: core

Flash:4MB

Card: up to 128GB

Operating system: RTOS

Number of simultaneous users: 4

Input: built in microphone

Main frequency: 384mhz

Power consumption: 300mAh (infrared on); 150mah (without infrared)

Infrared irradiation distance: 3-5M

Working temperature and humidity: - 10 ℃ ~ 50 ℃, humidity less than 95% (no condensation)

Sensor chip: gc0308

Focal length: 2m

Angle: 50 degrees

Display resolution: 640x480p (30W)

Day night conversion mode: day night switching

Digital noise reduction: 2D digital noise reduction

Video standard: MJPEG

Video stream: 640x480p 12 frames

Audio standard: g711u

Audio transmission: recording

Storage interface: up to 128GB

Power interface: USB interface

Wireless standard: IEEE802 11b/g/n

Frequency range:.4 GHz ~.4835 GHz

Channel bandwidth: 20MHz

Security: 64 / 128 bit WEP, WPA / WPA2, wpa-psk / wpa2-psk

Product size:9x5.5cm/3.54x2.16 inch

Package size:10x7x7.1cm/3.97x2.79x2.79 inch

Gross weight:123g/0.26

The Package Include:

1 x Host

1 x Power line

1 x Rubber pad

1 x Use manual

1 x 64G card

1. Why can't devices be added to WiFi connection?

Make sure that the device has been resets to the factory settings before adding the device: long press the "res key" for 5 seconds to see that the indicator flashes or the prompt tone is resetting and revert the factory settings. In addition, the camera onl- supports.4GHz Wi-Fi. If the scene S- is routed, Hao turns the frequency of the router and selects.4G

. What if the display camera is disconnected?

First guard whether the power supply and network are normal, and then power off and restart the camera. If the line still drops restart, delete the camera in the app and add it again.

Q: how to check if your camera is abnormally offline?

1. Check whether the power supply and network are normal

. Reseat the power supply to restart the device

3. Reconfigure the camera

4. Check whether the network bandwidth at home is more than 4-M It is also necessary to insert card in the power-off state, otherwise it will crash