Black Wrought Iron Gate Ring Turn Latch Lock Set 6.5" W Light Duty Antique Latch Replica Pull Catch for Barn Doors or Gates w/Screws Renovators Supply Pack of 10

BLACK WROUGHT IRON DOOR GATE TURN RING FLIP LATCHES

The colonial door latch reproduction locks are sure to bring charm to your gates. These popular antique vintage style latches look beautiful on barn doors, fences, and farmhouses gates.

FEATURES

- Latch made of Wrought iron
- Apply Protective Coating for Outdoor Use
- Two-sided latch opens in both directions - left or right
- Mounting Screws are included
- Affordably update old gates and doors
- Overall measurement - 6.5" Length, 5" Width and 2" Proj.
- Involves an easy installation

INSTALLATION GUIDE

1. Place the latch on the gate where you wish to install it and mark its screw holes
2. Mark the centre of the flip latch's ring drop
3. Drill the centre hole all the way through the door wide enough to rotate the spindle bar smoothly
4. Connect the main ring flip latch to the spindle and insert it via the door or gate
5. Cut extra edges of the spindle bar based on the thickness of your gate
6. Install flip latch on the gate using screws
7. Place the next ring drop plate on the spindle bar head on other side of the door
8. Ensure the spindle bar is rotating free on turning
9. Close the gate and align the flip latch bar straight
10. Install the remaining two latch parts on the same side of the flip bar
11. Turn the ring to lift the flip latch and lock/unlock the gate - And you are done

Come set it up as your curb appeal - Create a great first impression