CATPAN New Upgraded 0.25MM&0.4MM&0.6MM Hotend Kit for Flashforge AD5X, 3s Quick-Detachable Nozzle Extruder & Block Throat Tube with 6PK Silicone Cover & 6PK Nozzle Brush, 32mm³/s High Flow

Only supports AD5X models manufactured after May 31, 2025. It needs to use the upgraded screws and radiator when you install it on the printer purchased before 31st May, 2025. Officially clarified: The new printhead has physical differences from the old connector; forcing the installation may cause deformation of the hot end module.

The innovative integrated neck heating module facilitates rapid assembly and disassembly of the print head, hot end, and heat sink. Compared to conventional split designs, replacement efficiency is enhanced by 70%, enabling effortless maintenance even for novice users.

When the Adventurer 5X hotend assembly exhibits fluctuations in extrusion flow, material breakage or seepage, or when printed parts display noticeable marks, delamination, layer separation, or surface roughness, this typically indicates dimensional inaccuracies caused by long-term wear resulting from nozzle ageing. Prompt replacement is required to prevent compromising print stability.

It is high-temperature resistant up to 320℃. It's compatible with filaments like PLA/ABS/PETG/TPU/PP/PC/Nylon, etc.

Package Included: 3PCS Nozzles (0.25mm+0.4mm+0.6mm) + 6*silicone sleeves + 6*silicone nozzle cleaning tools.